What are some MUST have mods?

aznboi250r · June 25th, 2011, 09:14 PM

I know some people are probably fed up with seeing this post and are probably going to tell me use the "search" button but I really want to get some opinions. So far I've just ordered the Dan-moto Carbon slip on for my bike. So any feedback would be appreciated. Once again sorry guys bringing this topic once again XD

Was looking to also upgrade my lights, any suggestions on that too?

Oh btw I'm riding an 09 SE ninja so anything that could match the bike would awesome!

Alex · June 25th, 2011, 09:21 PM

http://www.ninjette.org/forums/showthread.php?t=22910

kkim · June 25th, 2011, 09:30 PM

Aloha and welcome, aznboi250r.

search!

before any mods, I'd suggest taking the MSF course and buying all of your safety gear.

aznboi250r · June 25th, 2011, 09:31 PM

Quote:

Originally Posted by kkim

Aloha and welcome, aznboi250r.

search!

before any mods, I'd suggest taking the MSF course and buying all of your safety gear.

Thank you! And I've already started riding and no worries I got my license with gear n all! Safety is my number 1 priority no matter what!

aznboi250r · June 25th, 2011, 09:32 PM

Quote:

Originally Posted by Alex

http://www.ninjette.org/forums/showthread.php?t=22910

Thanks I was just looking at this haha

rockNroll · June 25th, 2011, 09:33 PM

Get some sticky tires and do a track event.

alex.s · June 25th, 2011, 11:41 PM

spend your money on gas, you'll get much more enjoyment out of it

Yasko · June 26th, 2011, 12:23 PM

Buffalony · June 26th, 2011, 05:10 PM

Absolutely go through the bike and replace any painted black screws and bolts with stainless replacements. Make a list then head over to: http://www.desmoparts.com/ to order. Great quality stainless from them. pick up some M5 wellnuts while your there cause you'll need them.
Off the top of my head: The gas cap surround bolts, the bar mount bolts, the stock muffler endcap (I know your not going to use it anymore), two side panel fasteners, and allen carb cover bolts.
I dont recommend changing the rotors or the passenger foot bracket bolts because of a difference in shear strength of the stainless.

almost40 · June 26th, 2011, 06:40 PM

Quote:

Originally Posted by rockNroll

Get some sticky tires and do a track event.

BEST PLACE TO SPEND YOUR MONEY.
A good rider IS the best MOD.

aznboi250r · June 26th, 2011, 08:24 PM

Quote:

Originally Posted by Yasko

Oh man you really gave it your on this one! Thanks so much!

for a great member!

aznboi250r · June 26th, 2011, 09:52 PM

oh man thank you guys for the support and responses!

June 25th, 2011, 09:14 PM	#1
aznboi250r ninjette.org member Name: United States Location: Sofla Join Date: Jun 2011 Motorcycle(s): 2009 SE Kawasaki Ninja 250r Posts: 32	What are some MUST have mods? I know some people are probably fed up with seeing this post and are probably going to tell me use the "search" button but I really want to get some opinions. So far I've just ordered the Dan-moto Carbon slip on for my bike. So any feedback would be appreciated. Once again sorry guys bringing this topic once again XD Was looking to also upgrade my lights, any suggestions on that too? Oh btw I'm riding an 09 SE ninja so anything that could match the bike would awesome!

June 25th, 2011, 09:21 PM	#2
Alex ninjette.org dude Name: 1 guess :-) Location: SF Bay Area Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much. Blog Entries: 7	http://www.ninjette.org/forums/showthread.php?t=22910 __________________________________________________ Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered)

June 25th, 2011, 09:33 PM	#6
rockNroll . Name: rock Location: greenville, south carolina Join Date: Jun 2009 Motorcycle(s): black Posts: A lot.	Get some sticky tires and do a track event. __________________________________________________ Always get a second opinion because most of these people are makin' this stuff up

June 25th, 2011, 11:41 PM	#7
alex.s wat Name: wat Location: tustin/long beach Join Date: Sep 2009 Motorcycle(s): wat Posts: Too much. Blog Entries: 5 MOTM - Oct '12, Feb '14	spend your money on gas, you'll get much more enjoyment out of it __________________________________________________

June 26th, 2011, 12:23 PM	#8
Yasko Texas Newbie Name: John Location: D/FW Texas Join Date: Sep 2010 Motorcycle(s): 07 Ninja EX250, 07 FZ6 Posts: A lot.	Home Mods that can be done for under $50.00 1 2 3 4 5 (0 votes) Monday, 23 May 2011 Since a lot of people like to mod their bikes, I thought I would start a thread of various modifications that can be done for under $50.00. This is not an exhaustive list so, if anyone else has one, feel free to post up a link here. Lights http://www.ninja250forum.com/index.p...18949#msg18949 http://www.ninja250forum.com/index.p...6&topic=3598.0 Airbox Snorkel Removal http://www.ninjette.org/forums/showthread.php?t=10090 Air filters http://www.ninja250forum.com/index.p...26108#msg26108 http://www.ninja250forum.com/index.p...6&topic=3515.0 Carburetor Needle Shimming http://www.ninjette.org/forums/showthread.php?t=11963 Throttle Tube Mod http://www.ninjette.org/forums/showthread.php?t=26270 Brake pads http://www.ninja250forum.com/index.p...6&topic=2760.0 Fuel Filter http://www.ninja250forum.com/index.p...6&topic=3703.0 Levers http://www.ninja250forum.com/index.p...6&topic=3459.0 12 volt outlet http://www.ninja250forum.com/index.p...6&topic=3677.0 Phone Mount http://www.ninja250forum.com/index.p...6&topic=3587.0 Brake Light Modulator http://www.ninja250forum.com/index.p...26&topic=922.0 Flasher Upgrade http://www.ninja250forum.com/index.p...6&topic=2650.0 Horn http://www.ninja250forum.com/index.p...6&topic=2648.0 Front Sprocket http://www.ninja250forum.com/index.p...cle&article=42 Grips http://www.ninja250forum.com/index.p...6&topic=2076.0 http://www.ninja250forum.com/forum/i...25096#msg25096 Fender Eliminator http://www.ninja250forum.com/index.p...6&topic=1683.0 http://www.ninja250forum.com/index.p...26&topic=824.0 L.E.D. Tail Lights http://www.ninja250forum.com/index.p...6&topic=1100.0 Polished Rim Lip http://www.ninja250forum.com/forum/i...;topicseen#new Extended Front Fender http://www.pyramid-plastics.co.uk/ca...93ce7c27420cbe Painted Wind Screen http://www.ninjette.org/forums/showthread.php?t=46691 Smoked Headlight Cover http://www.pyramid-plastics.co.uk/ca...93ce7c27420cbe Smoked Turn Signals http://www.ninja250forum.com/forum/i...;topicseen#new Foot Pegs http://www.ninjette.org/forums/showthread.php?t=68501 Oil Filler Plugs http://www.yoshimura-rd.com/ps-4290-...ller-plug.aspx http://www.slingshotracing.net/catal...-cap-p-55.html http://www.slingshotracing.net/catal...-cap-p-54.html http://projektd.com/product_info.php...roducts_id=155 Rear Swing Arm Spools http://www.yoshimura-rd.com/ps-4390-...d-stopper.aspx http://www.slingshotracing.net/catal...ols-p-254.html http://fatbikez.com/kawasaki-ninja-2...m-sliders.html http://projektd.com/product_info.php...products_id=34 Bar Ends http://www.yoshimura-rd.com/ps-4405-1499-bar-ends.aspx http://www.slingshotracing.net/catal...ends-p-47.html http://www.solomotoparts.com/product...5&cat=0&page=3 http://projektd.com/product_info.php...roducts_id=150 Stainless Steel Brake Lines http://superstreetbikeusa.com/produc...inja-2008%252d http://www.cyclebrakes4less.com/prod...2008%252d.html http://www.sportbikedirect.com/produ...inja-2008%252d http://www.solomotoparts.com/product...3&cat=0&page=2 Tank Cover / Pads http://www.solomotoparts.com/product...2&cat=0&page=4 http://stores.sportbiketrackgear.com/Detail.bok?no=3514 Barnett Performance Clutch Spring Set http://www.solomotoparts.com/product...4&cat=0&page=1 Angled Aluminum Sport Bike Valve Stems http://stores.sportbiketrackgear.com...l.bok?no=10302 http://www.ninjette.org/forums/showthread.php?t=68342 Lowering Links http://projektd.com/product_info.php...roducts_id=138
	1 out of 1 members found this post helpful.

June 25th, 2011, 09:30 PM	#3
kkim Join Date: Nov 2008 Posts: Too much.	Aloha and welcome, aznboi250r. search! before any mods, I'd suggest taking the MSF course and buying all of your safety gear.

June 26th, 2011, 05:10 PM	#9
Buffalony ninjette.org certified postwhore Name: Joe Location: Buffalo NY Join Date: Jan 2009 Motorcycle(s): 08 Ninja 250 "Wasabi", 82 Yamaha xj650j Posts: A lot.	Absolutely go through the bike and replace any painted black screws and bolts with stainless replacements. Make a list then head over to: http://www.desmoparts.com/ to order. Great quality stainless from them. pick up some M5 wellnuts while your there cause you'll need them. Off the top of my head: The gas cap surround bolts, the bar mount bolts, the stock muffler endcap (I know your not going to use it anymore), two side panel fasteners, and allen carb cover bolts. I dont recommend changing the rotors or the passenger foot bracket bolts because of a difference in shear strength of the stainless. __________________________________________________

June 26th, 2011, 09:52 PM	#12
aznboi250r ninjette.org member Name: United States Location: Sofla Join Date: Jun 2011 Motorcycle(s): 2009 SE Kawasaki Ninja 250r Posts: 32	oh man thank you guys for the support and responses!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My mods...	hpav13	2008 - 2012 Ninja 250R Farkles	9	January 5th, 2014 05:42 PM
Mods	Old Lemon	2008 - 2012 Ninja 250R Farkles	20	May 5th, 2012 12:37 AM
First Mods	FoxRacerX78X	2008 - 2012 Ninja 250R Farkles	5	April 4th, 2012 03:24 AM
Yes or no on these mods?	Kerberos	General Motorcycling Discussion	19	December 13th, 2011 10:33 AM
Your First Mods	N1nja_N00b	2008 - 2012 Ninja 250R Farkles	32	October 6th, 2011 01:52 PM