November 22nd, 2011, 02:52 PM | #1 |
ninjette.org member
Name: Jeremy
Location: Langton, Ontario, Canada
Join Date: Nov 2011 Motorcycle(s): 09 kawasaki 250r Posts: 25
|
newbie here got lots of plans
im new to these forums and i have lots of plans for my bike and have found this site very knowledgeable with the new-gen ninja 250r. But anyway my name is Jeremy and i have a red 09 250r with just over 4000 km and stock in almost every way except that there is a basic fender eliminator.
I have plans of turning this little machine into a stunter/everyday rider, and i am doing this to the 250r cause of the cost of the machine is alot cheaper than your average "stunt bike" and i belive that i decent stunt/everyday rider can become of this machine without haveing to worry about wreaking/destroying a 10+k bike. So my plans arte to make a custom stunt cage(similar in style to freestyle inginuity), custom subcage (similar to sick innovations) new usd forks and tripples with corresponding breaks (still doing reaserch any help would be appericiated), new clip-ons, 05ish master and leaver (x2 one for front one for rear handbreak), new swing arm (again still doing reaserch on fitting r6 swing arm),bigger tires (unsure of front size just yet but most likely 150 rear), sprocket set ( -1, +2 maybe a bit more), rear set (still looking for something i like), new windscreen (hotbodies db smoked), flush mount signals (front and rear, or hotbodies eliminator and flush fronts), projector/angel eyes/hid retrofit headlight (custom), custom decal kit, and i think thats it.... any other suggestions welcomed |
|
November 22nd, 2011, 02:55 PM | #2 |
ninjette.org certified postwhore
Name: Sean
Location: Mary Esther, FL
Join Date: Jan 2009 Motorcycle(s): 2008 Ninja 250 1998 HD Road King Posts: A lot.
|
Welcome to the forum
__________________________________________________
http://sandollarmotorcycleclub.com/ |
|
November 22nd, 2011, 02:57 PM | #3 |
ninjette.org member
Name: Jeremy
Location: Langton, Ontario, Canada
Join Date: Nov 2011 Motorcycle(s): 09 kawasaki 250r Posts: 25
|
Thanks!! hopfully i can get the help i need and help others as well!!
|
|
November 22nd, 2011, 03:01 PM | #4 |
Blind 250 Loving Whore
Name: Tom
Location: Chesapeake, VA
Join Date: May 2011 Motorcycle(s): 2008 250R, 02 FZ1, '20 Fat Bob 114 Posts: A lot.
|
Welcome!
Sounds like you have the workings for a very unique bike there. I'm not into the stunt scene myself, but am all for breaking new boundaries with this bike. I have a giant list of mods for my bike as well, so I know how you feel :P |
|
November 22nd, 2011, 03:03 PM | #5 |
The Corner Whisperer
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
|
__________________________________________________
Goal: Shake A Million Hands | Look through the corners | Track Day Prep | Closest track? | The Mid-Ohio School |
|
November 22nd, 2011, 03:05 PM | #6 |
ninjette.org guru
Name: Edd
Location: Los Angeles-CALI
Join Date: Aug 2011 Motorcycle(s): 2011 SE Pearl/Ebony Ninja 250R Posts: 376
|
__________________________________________________
[#4] |
|
November 22nd, 2011, 05:15 PM | #7 |
ninjette.org member
Name: Jeremy
Location: Langton, Ontario, Canada
Join Date: Nov 2011 Motorcycle(s): 09 kawasaki 250r Posts: 25
|
thanks that helps alot like i noted im still doing reaserch on what i can and cant do with my bike but that thread shows prime example as 2 why i and to do a usd fork conversion to my bike
|
|
November 22nd, 2011, 07:43 PM | #8 |
ninjette.org certified postwhore
Name: Ken
Location: Indio, CA
Join Date: Dec 2008 Motorcycle(s): '08 Kawasaki EX250 "Yoshi", '99 Kawasaki Concours "Grace", '06 Concours "Belle", '06 Yamaha YZF600R "Slick" Posts: A lot.
Blog Entries: 3
|
__________________________________________________
< ATGATT > Sweat you can wipe off, Road rash you can't. HEY!! Unregistered!! Does your bike have a name? |
|
November 22nd, 2011, 09:46 PM | #9 |
ninjaholic
Name: Dustin
Location: Oceanside, CA
Join Date: Jun 2010 Motorcycle(s): 09' SE 250R (sold), 03' ZX-6R, 99' XL1200C SP Posts: A lot.
Blog Entries: 3
|
Welcome to the site!!! Sounds like you have a ton planned for your bike. You mentioned you picked the 250R for the cheap cost... after all you are talking about doing, it would be less expensive to buy an older 600 that is already set up for stunting... just a thought
I definitely don't have anything against modding the hell out of a 250R... I've obviously added plenty to mine... but if you are looking for an inexpensive bike and then mentioning all you did... might not be quite what you expected.
__________________________________________________
09' SE Ninja 250R $2,547.83 worth of mods installed... come on Unregistered, you know you want to know what? Check my Blog "Modification List" |
|
November 23rd, 2011, 11:43 AM | #10 |
Name: ...
Location: ...
Join Date: May 2009 Motorcycle(s): ... Posts: 999
|
Welcome to the 250 party.
|
|
November 23rd, 2011, 01:30 PM | #11 | |
ninjette.org member
Name: Jeremy
Location: Langton, Ontario, Canada
Join Date: Nov 2011 Motorcycle(s): 09 kawasaki 250r Posts: 25
|
Quote:
trure but i like this lil 250 and belive it 2 be easyer to find/make parts for it as opposed to buying something that someone else did there way not my way... lol im big on custom, stand out in a crowed kinda thing, not may people around would think of doing this to a 250 so its different to beging with, thats just my thought on it. not to say that i will get it all said and done and not like i thought it would be but at least its still what i made it to be, if i dont like it i chage it re set things and keep going, modding a $5000 maching and breaking it (if such a thing would happen ) dont worry me as much as a 10+k machine if you understand what i mean... thanks though i do appericiate it and i am looking for a 07-08 zx6r to do a similar thing but i wanna keep playing with this one for now, heck maybe ill try that ex500 swap and wont need the zx6r lol. |
|
|
November 23rd, 2011, 01:39 PM | #12 |
ninjette.org member
Name: Jeremy
Location: Langton, Ontario, Canada
Join Date: Nov 2011 Motorcycle(s): 09 kawasaki 250r Posts: 25
|
btw has anyone tried the 08 6r swingarm and fork conversion over in usa/canada and see the fit for the fork conversion ive seen the indonision guys have done it but im curious on if the forks hit anything up front or if it clears..
|
|
November 23rd, 2011, 02:34 PM | #13 |
ninjette.org member
Name: Danica
Location: California
Join Date: Nov 2011 Motorcycle(s): None yet Posts: 25
|
Welcome to the fun!
|
|
November 24th, 2011, 03:37 PM | #14 |
ninjette.org certified postwhore
Name: Rick
Location: Alexandria, Louisiana
Join Date: Jan 2009 Motorcycle(s): 05 Blue Ninja 250 Posts: Too much.
MOTY - 2017, MOTM - Jan '19, Oct '16, May '14
|
Hello and welcome.
|
|
December 8th, 2011, 05:08 PM | #15 |
ninjette.org member
Name: Jose
Location: Southern California
Join Date: Sep 2011 Motorcycle(s): PreGen Ninja Posts: 54
|
Welcome!
|
|
December 11th, 2011, 12:24 PM | #16 |
#squid
Name: nickypoo
Location: Five Guys
Join Date: Jul 2011 Motorcycle(s): Track dedicated 2008 ZX6R Posts: A lot.
MOTM - Jul '16
|
to Ninjette!!!
__________________________________________________
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[crash.net - MotoGP] - Bautista: Lots of power, lots of work to do | Ninjette Newsbot | Motorcycling News | 0 | November 28th, 2014 06:23 AM |
Lots and lots of parts | Super Dave | Motorcycle-related | 40 | August 26th, 2014 11:58 AM |
Lots of changes! | iceknyght | The Ex-Ninjetters Lair | 29 | May 5th, 2014 07:55 AM |
lots of color | GateKeeper | 2008 - 2012 Ninja 250R Farkles | 7 | January 7th, 2012 10:55 PM |
[superbikeplanet.com] - And Lots And Lots And Lots Of Haybales | Ninjette Newsbot | Motorcycling News | 0 | March 13th, 2009 11:30 AM |
|
|