October 11th, 2013, 05:04 PM | #1 |
ninjette.org member
Name: Daveo
Location: Alaska/Massachusetts
Join Date: Feb 2013 Motorcycle(s): 2012 Ninja 250r, 2013 Ninja 636, 2012 Yamaha 950 Posts: 33
|
Hey
Here is the ninja 250 I built for my girlfriend Yoshimura Fender Elim Sho-gun frame sliders Yoshimura Full Exhaust Dynojet Stage 2 jet kit, Weisco 13:1 pistons CRG roller clutch and break levels short Streched 5" 130t gold chain Theres a bunch more stuff but I really don't remember, hope you guys like how it looks |
|
October 11th, 2013, 05:06 PM | #2 |
ninjette.org member
Name: Daveo
Location: Alaska/Massachusetts
Join Date: Feb 2013 Motorcycle(s): 2012 Ninja 250r, 2013 Ninja 636, 2012 Yamaha 950 Posts: 33
|
also re geared, I think stock was 14-45 if I remember right now its a 15-42 (don't quote me, as I said I don't really remember off the top of my head)
|
|
October 11th, 2013, 05:06 PM | #3 |
Jigglin' your Jiglets
Name: Sean
Location: San Jose, Ca
Join Date: Jun 2011 Motorcycle(s): 2009 K1300S, 2013 Ninja 300, 2011 Ninja 250R, Faster than Unregistered's ninjette Posts: Too much.
Blog Entries: 1
MOTM - Apr '13
|
Dang you built that!?
__________________________________________________
If the Ninja 250 doesn't have enough power for you, then you don't know how to ride it. AFM #676 Supersports are for n00bs |
|
October 11th, 2013, 05:10 PM | #4 |
ninjette.org member
Name: Daveo
Location: Alaska/Massachusetts
Join Date: Feb 2013 Motorcycle(s): 2012 Ninja 250r, 2013 Ninja 636, 2012 Yamaha 950 Posts: 33
|
less glare |
|
October 11th, 2013, 05:13 PM | #5 |
ninjette.org member
Name: Daveo
Location: Alaska/Massachusetts
Join Date: Feb 2013 Motorcycle(s): 2012 Ninja 250r, 2013 Ninja 636, 2012 Yamaha 950 Posts: 33
|
Yeah, me and her sat down and did all the wrench time, we got bored, and she loves the look of some of streched bikes and really wanted it. Surprisingly it actually handles a LOT better then it did stock. Its much more stable in wind and doesn't get pushed around the road so much with passing traffic. It turns almost identical to when it was stock too, I'm pretty impressed with it. She did the break cable modification for it to work, and bled the brakes, basically just turned the fitting 180* and get an extra few inches from the stock line. Saved us a few dollars over newer brake lines. But the strech mod was only like 350 bucks total, the extensions were like 230.00 and the new chain was like 140
|
|
October 11th, 2013, 05:19 PM | #6 |
Certifiable nontundrum
Name: Harper
Location: NC Milkshake stand
Join Date: Mar 2013 Motorcycle(s): 2013 SE NINJA 300 Posts: Too much.
MOTM - Sep '13, Sep '16
|
Who stretched it??? I like it!!! Def lookin good!!! Hi
__________________________________________________
|
|
October 11th, 2013, 05:20 PM | #7 | |
Blind 250 Loving Whore
Name: Tom
Location: Chesapeake, VA
Join Date: May 2011 Motorcycle(s): 2008 250R, 02 FZ1, '20 Fat Bob 114 Posts: A lot.
|
Quote:
|
|
|
October 11th, 2013, 05:21 PM | #8 |
ninjette.org member
Name: Daveo
Location: Alaska/Massachusetts
Join Date: Feb 2013 Motorcycle(s): 2012 Ninja 250r, 2013 Ninja 636, 2012 Yamaha 950 Posts: 33
|
I did the strech/exhaust/regear/pistons
she did the fender elim/levers/frame sliders/rear brake mod and the chain and we had it Jetted on a dyno from our local bike shop |
|
October 11th, 2013, 05:39 PM | #9 |
Certifiable nontundrum
Name: Harper
Location: NC Milkshake stand
Join Date: Mar 2013 Motorcycle(s): 2013 SE NINJA 300 Posts: Too much.
MOTM - Sep '13, Sep '16
|
Bolt on extension???
__________________________________________________
|
|
October 11th, 2013, 05:42 PM | #10 |
ninjette.org member
Name: Daveo
Location: Alaska/Massachusetts
Join Date: Feb 2013 Motorcycle(s): 2012 Ninja 250r, 2013 Ninja 636, 2012 Yamaha 950 Posts: 33
|
yes, I ordered it offline. Fantastic part, made very well. I'd give you guys the website I got it from if I could remember it.
|
1 out of 1 members found this post helpful. |
October 11th, 2013, 05:44 PM | #11 |
ninjette.org sage
Name: Justin
Location: Fresno CA
Join Date: Jun 2012 Motorcycle(s): 12' Ninja 250 Posts: 831
|
|
|
October 11th, 2013, 05:44 PM | #12 |
ninjette.org member
Name: Daveo
Location: Alaska/Massachusetts
Join Date: Feb 2013 Motorcycle(s): 2012 Ninja 250r, 2013 Ninja 636, 2012 Yamaha 950 Posts: 33
|
Yeah if anyone has any questions about it, I don't mind answering. I just have a terrible memory where I sourced most of these parts since it was usually like 1 time orders online.
|
|
October 11th, 2013, 05:45 PM | #13 |
ninjette.org member
Name: Daveo
Location: Alaska/Massachusetts
Join Date: Feb 2013 Motorcycle(s): 2012 Ninja 250r, 2013 Ninja 636, 2012 Yamaha 950 Posts: 33
|
|
|
October 11th, 2013, 05:49 PM | #14 |
wat
Name: wat
Location: tustin/long beach
Join Date: Sep 2009 Motorcycle(s): wat Posts: Too much.
Blog Entries: 5
MOTM - Oct '12, Feb '14
|
hey bro i don't think thats a 636... i'm pretty sure thats just a ninja with a stretched swinger. i think you got ripped off! :P
__________________________________________________
|
|
October 11th, 2013, 05:52 PM | #15 |
ninjette.org member
Name: Daveo
Location: Alaska/Massachusetts
Join Date: Feb 2013 Motorcycle(s): 2012 Ninja 250r, 2013 Ninja 636, 2012 Yamaha 950 Posts: 33
|
hahaha, I own a 2013 636, this 250, and a Yamaha 950.
photo shoot with my 636 But this site not about those bikes! hahaha So I digress |
|
October 11th, 2013, 07:01 PM | #16 |
Certifiable nontundrum
Name: Harper
Location: NC Milkshake stand
Join Date: Mar 2013 Motorcycle(s): 2013 SE NINJA 300 Posts: Too much.
MOTM - Sep '13, Sep '16
|
I love stretched bikes... But folks around here do like their stock suspensions an swing arms :/
Still it's a sweet bike
__________________________________________________
|
|
October 11th, 2013, 07:13 PM | #17 |
ninjette.org member
Name: Daveo
Location: Alaska/Massachusetts
Join Date: Feb 2013 Motorcycle(s): 2012 Ninja 250r, 2013 Ninja 636, 2012 Yamaha 950 Posts: 33
|
Thanks man,
I've never been a fan of stock anything and its something my girl was looking at when we talked about modifying her bike, she started looking at pictures of bikes online, and just kept the conversation going back to the longer looking back end and extended swing arms and lowering it for her. Originally I was going to fabricate something for it because I couldn't find anyone who made anything, then I found these online. As I said though, it handles better than it did stock. No knock in the wind and getting blown around on the highway, and it turns on a dime just like it did before. Anyone that naysays it well...Cool for you. Don't knock it because you can't afford/don't want to try it. And lets be honest, my girl is a new rider and chances are she's not going to be dragging knee, racing track anytime soon on it, so I doubt she'll need that .01 on her time to win. So overall, if you hate it...to you I say... and go work on your own bike cool cat. Other than that, thanks for the peeks and the thumbs up. |
|
October 11th, 2013, 07:18 PM | #18 |
Certifiable nontundrum
Name: Harper
Location: NC Milkshake stand
Join Date: Mar 2013 Motorcycle(s): 2013 SE NINJA 300 Posts: Too much.
MOTM - Sep '13, Sep '16
|
By the time my 300 is fully modded it very well may be stretched first is the fender delete though
__________________________________________________
|
|
October 11th, 2013, 07:23 PM | #19 |
ninjette.org member
Name: Daveo
Location: Alaska/Massachusetts
Join Date: Feb 2013 Motorcycle(s): 2012 Ninja 250r, 2013 Ninja 636, 2012 Yamaha 950 Posts: 33
|
yeah they are pretty nice, almost wish her and I waited a year to buy it, but we bought the 2012 right when it came out so we had no idea a 300 was in talks. Probably would of done all this to the 300 if it was the model available when we purchased it for her
Best of luck in your modding ventures man. |
1 out of 1 members found this post helpful. |
October 11th, 2013, 07:30 PM | #20 |
Certifiable nontundrum
Name: Harper
Location: NC Milkshake stand
Join Date: Mar 2013 Motorcycle(s): 2013 SE NINJA 300 Posts: Too much.
MOTM - Sep '13, Sep '16
|
Thanks! Have fun out there, an welcome to the site
__________________________________________________
|
|
October 11th, 2013, 07:31 PM | #21 |
ninjette.org member
Name: Daveo
Location: Alaska/Massachusetts
Join Date: Feb 2013 Motorcycle(s): 2012 Ninja 250r, 2013 Ninja 636, 2012 Yamaha 950 Posts: 33
|
Appreciate it, but I've been here for a while poking around never really messaging until now, felt like I wanted the bike finished first before I spoke haha
|
1 out of 1 members found this post helpful. |
October 11th, 2013, 08:15 PM | #22 |
The Corner Whisperer
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
|
So you taking something for your memory thing? bwahahhahahaha Also, you waited to long to speak up, you cheated us out of a build thread.
jk yo! Cool stuff Daveo. As long as your girl rides/likes it, that is all that matters.
__________________________________________________
Goal: Shake A Million Hands | Look through the corners | Track Day Prep | Closest track? | The Mid-Ohio School |
|
October 11th, 2013, 08:26 PM | #23 | |
ninjette.org member
Name: Daveo
Location: Alaska/Massachusetts
Join Date: Feb 2013 Motorcycle(s): 2012 Ninja 250r, 2013 Ninja 636, 2012 Yamaha 950 Posts: 33
|
Quote:
haha, I need to start taking stuff for my memory, I feel like an old man and I'm only 26, never did drugs in my life, but the army messed me up pretty good haha, too many explosions in Afghanistan, I even have a hard time with balance...but I think that has more to do with my drinking Yup, and as all of us with girls know...its now about what we like. I'm trading in my 950 for a Harley switchback and to do so I had to find a bike she liked to sit on first hahahaha P.S. - I still have all the photos for a build thread. Ridings my life, I'm part of the Green Knights MMC here in Alaska. All my spare time goes into my bikes |
|
|
October 11th, 2013, 08:37 PM | #24 |
The Corner Whisperer
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
|
Well thanks for your service man. I have a similar thing going with my old lady. She wants me to get another HD but I want her to get a bike of her own. Step one of my plan is complete, she has her learners permit.
__________________________________________________
Goal: Shake A Million Hands | Look through the corners | Track Day Prep | Closest track? | The Mid-Ohio School |
|
October 11th, 2013, 08:48 PM | #25 |
ninjette.org member
Name: Daveo
Location: Alaska/Massachusetts
Join Date: Feb 2013 Motorcycle(s): 2012 Ninja 250r, 2013 Ninja 636, 2012 Yamaha 950 Posts: 33
|
haha thanks man, yeah I'm pretty pumped to get my Harley, ever since I got a cruiser, I'm completely sold, I barely get on my sport bike now ha
|
|
October 11th, 2013, 09:03 PM | #26 |
The Corner Whisperer
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
|
Let's not go too far now...
__________________________________________________
Goal: Shake A Million Hands | Look through the corners | Track Day Prep | Closest track? | The Mid-Ohio School |
1 out of 1 members found this post helpful. |
October 11th, 2013, 09:16 PM | #27 |
Private Joker
Name: Ben
Location: Towson, MD
Join Date: Nov 2012 Motorcycle(s): '99/'01 Ninja 250 "sketchy", '13 Ninja 300 "yoshi", '03 GSXR 600 "merlin" Posts: A lot.
MOTM - Mar '14
|
I think that is the first stretched 250 I've ever seen/heard of. I'm shocked that you feel that it improves the handling as I would imagine it having the opposite effect.
nice pic csmith, switch sport bikes with motorcycles and you've got it dead on though I don't see myself ever riding a cruiser. |
|
October 11th, 2013, 09:46 PM | #28 |
ninjette.org member
Name: Daveo
Location: Alaska/Massachusetts
Join Date: Feb 2013 Motorcycle(s): 2012 Ninja 250r, 2013 Ninja 636, 2012 Yamaha 950 Posts: 33
|
|
|
October 11th, 2013, 09:48 PM | #29 | |
ninjette.org member
Name: Daveo
Location: Alaska/Massachusetts
Join Date: Feb 2013 Motorcycle(s): 2012 Ninja 250r, 2013 Ninja 636, 2012 Yamaha 950 Posts: 33
|
Quote:
and honest to god man, we all know the 250 can be dicey in wind on the highway, but this thing is now a rock, it doesn't get blown around and it handles the same in a turn. I wouldn't go back now that its like this |
|
|
October 12th, 2013, 09:18 PM | #30 |
ninjette.org certified postwhore
Name: Rick
Location: Alexandria, Louisiana
Join Date: Jan 2009 Motorcycle(s): 05 Blue Ninja 250 Posts: Too much.
MOTY - 2017, MOTM - Jan '19, Oct '16, May '14
|
Hello and welcome.
|
|
October 13th, 2013, 05:55 PM | #31 |
ninjette.org certified postwhore
Name: Ken
Location: Indio, CA
Join Date: Dec 2008 Motorcycle(s): '08 Kawasaki EX250 "Yoshi", '99 Kawasaki Concours "Grace", '06 Concours "Belle", '06 Yamaha YZF600R "Slick" Posts: A lot.
Blog Entries: 3
|
__________________________________________________
< ATGATT > Sweat you can wipe off, Road rash you can't. HEY!! Unregistered!! Does your bike have a name? |
|
October 13th, 2013, 09:58 PM | #32 |
ninjette.org member
Name: Daveo
Location: Alaska/Massachusetts
Join Date: Feb 2013 Motorcycle(s): 2012 Ninja 250r, 2013 Ninja 636, 2012 Yamaha 950 Posts: 33
|
|
|
October 14th, 2013, 05:32 AM | #33 |
Daily Ninjette rider
Name: Hernan
Location: Florida
Join Date: Mar 2011 Motorcycle(s): 2007 Ninja 250 Posts: A lot.
MOTY - 2016, MOTM - Dec '12, Jan '14, Jan '15, May '16
|
Welcome to our site, Daveo !!!
__________________________________________________
Motofool .................................Never ride faster than your guardian angel can fly "Mankind is composed of two sorts of men — those who love and create, and those who hate and destroy. Love is the bond between men, the way to teach and the center of the world." - José Martí |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
hey...:) | ninjamama7 | New Members | 13 | February 16th, 2012 09:38 PM |
Hey everyone | Live2ride | New Members | 8 | January 31st, 2011 09:41 AM |
Hey Hey from S. Oregon | voidrider | New Members | 8 | January 15th, 2011 10:52 AM |
hey | ungluck | New Members | 25 | December 13th, 2010 01:23 AM |
hey everyone | eccsdrei | New Members | 10 | April 20th, 2010 09:15 PM |
|
|