![]() |
![]() |
#1 |
ninjette.org member
Name: Jeff
Location: Utah
Join Date: Mar 2014 Motorcycle(s): EX250 Posts: 24
|
Finally got clip ons...
...and I was not expecting such a huge difference! The feel and look are almost like having a whole new bike. I've only been on a couple relatively short rides with them but, so far, I don't think I'll be going back to the stock setup any time soon.
I guess this would be as good a time as any to post a pic of the little ninja since I have yet to do so on the forum. Enjoy! |
![]() |
![]() 1 out of 1 members found this post helpful. |
![]() |
#2 |
The Corner Whisperer
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
|
![]()
__________________________________________________
Goal: Shake A Million Hands | Look through the corners | Track Day Prep | Closest track? | The Mid-Ohio School |
![]() |
![]() |
![]() |
#3 |
I'm crazy,your excuse is?
Name: Winston
Location: Connecticut
Join Date: May 2013 Motorcycle(s): 250 2007 ninja Posts: A lot.
|
![]() what tail is that? also how are you supporting the seat after cutting the rear support off? |
![]() |
![]() |
![]() |
#4 |
ninjette.org member
Name: Hasersys
Location: Florida
Join Date: Dec 2014 Motorcycle(s): Have owned Ninja250,EX500,Xj650,RD250,XV750 Posts: 70
|
I like the look but if it were me Id add some support under that tail. Sweet though, I have seen a couple people cut that off an ride the thing but it has to be flexing quiet a bit.
|
![]() |
![]() |
![]() |
#5 |
in your machine
Name: Scott
Location: Summer Shade, Ky.
Join Date: Oct 2014 Motorcycle(s): 98 Ninja 250/F12 aka ZX-2R "SERENITY", 91 Ninja 500/A5 aka ZX-5R "Phoenix", 84 Honda GL1200A "SIREN" Posts: A lot.
Blog Entries: 25
MOTM - Jun '17, May '16, Mar '15
|
Looks awesome, great DIY job.
Nothing more satisfying than making a bike your own style.
__________________________________________________
violente et ignorantia ZX-2R BLOG Twitter and Instagram = Ghostt_Scott I'm not here to change your mind, just to inform. ![]() |
![]() |
![]() |
![]() |
#6 |
ninjette.org guru
Name: Kevin
Location: Madison
Join Date: Apr 2013 Motorcycle(s): 2004 Ninja 250 Posts: 465
|
get rid of that tire on the front!!!!!!!!!!!
|
![]() |
![]() 1 out of 1 members found this post helpful. |
![]() |
#7 |
ninjette.org member
Name: Jeff
Location: Utah
Join Date: Mar 2014 Motorcycle(s): EX250 Posts: 24
|
The tail was custom made by the last guy that owned the bike. The seat is actually surprisingly rigid with that part of the frame cut off. And I'm not the lightest guy either...
|
![]() |
![]() |
![]() |
#8 |
ninjette.org member
Name: Jeff
Location: Utah
Join Date: Mar 2014 Motorcycle(s): EX250 Posts: 24
|
|
![]() |
![]() |
![]() |
#9 |
I'm crazy,your excuse is?
Name: Winston
Location: Connecticut
Join Date: May 2013 Motorcycle(s): 250 2007 ninja Posts: A lot.
|
how much you get for it?
|
![]() |
![]() |
![]() |
#10 |
ran when parked
Name: Katie
Location: DC/MD
Join Date: Aug 2013 Motorcycle(s): Freeride 250R, KLX250SF, mopeds Posts: A lot.
MOTM - Sep '17, Dec '14
|
hahaha what bike is that muzzy pipe supposed to go on
__________________________________________________
Instagram: @katie.baden |
![]() |
![]() |
![]() |
#11 |
ninjette.org member
Name: Jeff
Location: Utah
Join Date: Mar 2014 Motorcycle(s): EX250 Posts: 24
|
|
![]() |
![]() |
![]() |
#12 |
ninjette.org member
Name: Jeff
Location: Utah
Join Date: Mar 2014 Motorcycle(s): EX250 Posts: 24
|
|
![]() |
![]() |
![]() |
#13 |
Inline 4!!!
Name: Danny
Location: MA
Join Date: May 2014 Motorcycle(s): 2008 CBR600rr, 1987 KLR 250 Posts: A lot.
|
Wait... WHAT? You sold your bike right after installing the clip ons?? Uh.... why?
![]() ![]() ![]()
__________________________________________________
Be careful. Remember you are invisible |
![]() |
![]() |
![]() |
#14 | |
Certifiable nontundrum
Name: Harper
Location: NC Milkshake stand
Join Date: Mar 2013 Motorcycle(s): 2013 SE NINJA 300 Posts: Too much.
MOTM - Sep '13, Sep '16
|
Quote:
![]()
__________________________________________________
![]() |
|
![]() |
![]() |
![]() |
#15 |
Inline 4!!!
Name: Danny
Location: MA
Join Date: May 2014 Motorcycle(s): 2008 CBR600rr, 1987 KLR 250 Posts: A lot.
|
Nah, I get that he wanted the cruiser but literally sold the bike 3 days after doing a mod is just very foreign to me. He was saying how happy he was and how it felt like a whole new bike lol
__________________________________________________
Be careful. Remember you are invisible |
![]() |
![]() |
![]() |
#16 |
Certifiable nontundrum
Name: Harper
Location: NC Milkshake stand
Join Date: Mar 2013 Motorcycle(s): 2013 SE NINJA 300 Posts: Too much.
MOTM - Sep '13, Sep '16
|
Didn't feel like a cruiser though...
![]() ![]()
__________________________________________________
![]() |
![]() |
![]() |
![]() |
#17 |
Private Joker
Name: Ben
Location: Towson, MD
Join Date: Nov 2012 Motorcycle(s): '99/'01 Ninja 250 "sketchy", '13 Ninja 300 "yoshi", '03 GSXR 600 "merlin" Posts: A lot.
MOTM - Mar '14
|
^ That's for damn sure, that's the exact opposite of a cruiser
__________________________________________________
I see you over there seeing me, do you see the me I think you see? ![]() |
![]() |
![]() |
![]() |
#18 |
ninjette.org member
Name: Andrew
Location: texas
Join Date: Jun 2014 Motorcycle(s): 07 ninja 250 Posts: 17
|
was gonna comment on crap oem tires. but sounds like its sorted out. looked good otherwise.
__________________________________________________
![]() |
![]() |
![]() |
![]() |
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Woodcraft clip-ons V.S. Kitaco clip-ons | tjb0012 | 2008 - 2012 Ninja 250R Tech Talk | 41 | June 20th, 2011 05:35 PM |
|
|