March 16th, 2012, 02:30 PM | #1641 |
never enough
Name: josh
Location: michigan
Join Date: Sep 2011 Motorcycle(s): Blue 2010 ninja 250R Posts: 277
|
sure did! or if i just wanted to sell it, because most people like stock bikes.
__________________________________________________
custom graphics, zero gravity DB |
|
March 16th, 2012, 03:10 PM | #1642 |
I'm a shark
Name: Jordan
Location: Mission Viejo, CA
Join Date: Mar 2011 Motorcycle(s): '10 Blue Ninja 250r, Bullet X-7 Posts: 70
|
did my first 2 up today, went very well as Amy's 2 previous boyfriends had bikes and she kinda remembered the laws of the passenger haha. Except she did lean on me for a good while - freaking arms are sore --- BUT THAT'S WHY WE DO TEST RUNS RIGHT?!
Exactly. All-in-all was a great ride today
__________________________________________________
People are like slinkies...not good for much, but bring a smile when pushed down stairs. |
|
March 18th, 2012, 12:30 AM | #1643 |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
Dug up the chain I broke off last week so that I could place it back on and break the nut on the countershaft sprocket. During this, I found that several roller links were missing their rollers and two had only barely more than half (enough to hang on in a C-shape).
This isn't the first time, either. Before, I thought it was because it was a cheap $30 chain or because it had been ridden way too tight and a shop had bungled the original install, but this one was an OEM chain with a couple links removed. It came off Casey's bike (@ninja250) but I know it wasn't like that. In fact, we did that specifically because I couldn't go home on the other chain that was already like that. We changed the rear sprocket too (brand new 38T) and the front sprocket still looks fine today, even though I was already changing both sprockets and the chain. Anyway, I broke off a representational segment of the chain and spent a ton of time trying to clean it. I also found a chunk of one of the missing rollers in the bag I had stored the trash chain in for the last week. Edit: Pics and video. Before doing all that, I used my 12v emergency impact wrench to remove the front sprocket. I later removed the rear sprocket and both wheels. The rims were still FILTHY from the cross-country trip last year and you could barely tell that the back one was supposed to be powder-coated blue! What better time to clean them than when the wheels are off the bike? Let me tell you though: Cleaning painted rims is an ALL DAY JOB. I used WD40 to eat away at the soap and water-resistant grime and then used a dry paper towel in all the same nooks and crannies and then used soap to get the oily film off. I need a tire change anyway, so I didn't care about getting WD40 on the bald tires. There were actually many steps in between, such as rubbing what I could off with my hands and a hose before getting started and doing each step repeatedly. The results on the rear, the dirtiest, were actually better than the front because there are some dark/dull areas that just won't shine up. I tried to finish before the motorsports shops close but that didn't happen. That means that the bike is going to be up on stands until at least Tuesday. There is so much pollen in the air that I had to rinse off the first wheel again after finishing cleaning the second, but I still figured that it's best to leave it on the bike so I slipped the axles back in just in case the stands failed (didn't mount nuts, speedo, brakes, etc). Speaking of stands failing, I do not trust my head stand. The paint on top of the holder arm is cracking and there is a dent on the bottom attachment point of the tube it attaches to, so I'm pretty sure the weld is going bad. Also, it didn't lift high enough to take the tire out without deflating it. If I weren't doing it on that foam flooring material, it would have been slightly easier. I put a 12mm Harbor Freight Pittsburgh socket in it to approximate an 18mm pin (measures 17.75mm) and it fits tight in both the stand and the head, but I don't think it's going all the way in the head when I lift. I think it is a different angle, so the head is just resting on it. Anyway, the whole thing is in a lean-to behind a barn with a walk-in door-sized area at one side and an open window-like area on the other but everything is still painted yellow with all the pollen. Seriously. I was scared to open my tank because I expected a ton of pollen to fall in and I can only imagine what my airbox air filter cleaning element looks like after idling for a couple hours (trying to empty a bit of the tank's stale gas so I can add Seafoam and E0 fuel). I did hand-tighten the new CS sprocket but I did not install the rear or the chain yet. I'm not going to bother until I go to get the replacement tires mounted. Even then, I now have to wonder what is ruining chains on my bike with today's revelation that it may not have been the unfortunate circumstances I knew my older chain had been through that caused it's identical problem. Oh! I needed the impact wrench on the front axle nut too. This is the second time that I've found it both way too tight and impossible to turn manually without someone holding the other side. What gives? I've found the rear way too tight too. It's like these things somehow tighten on the road despite their cotter pins. Almost forgot: I finally got a proper gap tool from Autozone today and found that the Harbor Freight one, which couldn't even lift the ground electrode with the "gap opener" part that was made for that purpose, also had bad measurements. HF read it well under the minimum spec of 0.030" while three Autozone gap tools measured it right at or a bit over 0.030". It also cost less than half of what HF charged. Screw Harbor Freight. Last futzed with by CZroe; March 18th, 2012 at 08:37 AM. |
|
March 18th, 2012, 04:28 PM | #1644 |
Motorcycle Hypermiler
Name: Vic
Location: Livermore CA
Join Date: Jan 2012 Motorcycle(s): 1999 & 2005 Kawasaki Ninja 250R's Posts: A lot.
|
I finished putting my carbs back together and reinstalling them on my bike. The airbox boots were very frustrating to install and were the worst part of the entire job. I adjusted the idle mixture and the bike runs much better.
I still need to synch the carbs but I want to install some tees in the vacuum lines so that it will be easier in the future. |
|
March 18th, 2012, 06:56 PM | #1645 |
ninjette.org certified postwhore
Name: .
Location: .
Join Date: Feb 2011 Motorcycle(s): . Posts: Too much.
MOTM - Feb '13, Feb '14
|
|
|
March 18th, 2012, 07:00 PM | #1646 |
ninjette.org sage
Name: Andy
Location: Sheboygan, WI
Join Date: Dec 2008 Motorcycle(s): 1988 Honda Hawk NT650, 1989 Honda Hawk NT650, 1997 GSXR750 Track Bike Posts: 890
|
Put the Ninja up for sale Saturday morning. Had someone text me asking to come check it out today, but they haven't responded back yet.
|
|
March 18th, 2012, 09:47 PM | #1647 |
Motorcycle Hypermiler
Name: Vic
Location: Livermore CA
Join Date: Jan 2012 Motorcycle(s): 1999 & 2005 Kawasaki Ninja 250R's Posts: A lot.
|
Chris, Thanks , I did cut off the battery holder from the back of the airbox; much better!
|
|
March 19th, 2012, 05:35 PM | #1648 |
ninjette.org sage
Name: Andy
Location: Sheboygan, WI
Join Date: Dec 2008 Motorcycle(s): 1988 Honda Hawk NT650, 1989 Honda Hawk NT650, 1997 GSXR750 Track Bike Posts: 890
|
After only being on Craigslist for 2 days the Ninja is sold.
|
|
March 21st, 2012, 06:48 AM | #1649 | |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
Quote:
http://www.ninjette.org/forums/showp...7&postcount=27 |
|
|
March 21st, 2012, 12:42 PM | #1650 |
?>ninja = i think not
Name: Xavier
Location: Gwinnett
Join Date: Jan 2012 Motorcycle(s): ninja 250 NINJA 650 Posts: 91
|
So i finally removed the snorkel (intake). Im pleased with the result... presumed better acceleration... n noticeable deeper sound
|
|
March 21st, 2012, 03:15 PM | #1651 |
ninjette.org member
Name: Chuck
Location: RI
Join Date: Oct 2011 Motorcycle(s): Ninja 2504 Posts: 32
|
I took my motorcycle to work. I worked in a remote office that was 60 miles away so I had a nice 120 mile trip (my longest so far). I got out earlier than expected today and it was gorgeous out and on the highway I got my Ninja up to 100MPH, damn it felt good. It felt even better since I just bought a Zero Gravity Double Bubble windscreen. In my opinion it makes the bike much more stable to ride on the highway. With the original windscreen I was practically laying on the tank praying the wind wouldn't take me, lol. Today was a good day.
|
|
March 21st, 2012, 04:05 PM | #1652 |
ninjette.org member
Name: mary
Location: san jose, ca
Join Date: Feb 2012 Motorcycle(s): 08 Ninja 250r Posts: 22
|
Installed a water temp gauge last weekend.
__________________________________________________
"I don't mind living in a man's world as long as i can be a woman in it. " ~Marilyn Monroe |
|
March 21st, 2012, 04:10 PM | #1653 |
ninjette.org guru
Name: andrew
Location: oakdale california
Join Date: Nov 2011 Motorcycle(s): 2012 ninja 250 Posts: 296
|
Today I installed a stainless steel brake line (took me less then an hour too!), Also removed passenger foot pegs and installed a yosh exhaust mount
|
|
March 21st, 2012, 04:12 PM | #1654 |
ninjette.org guru
Name: andrew
Location: oakdale california
Join Date: Nov 2011 Motorcycle(s): 2012 ninja 250 Posts: 296
|
|
|
March 21st, 2012, 04:30 PM | #1655 |
The Corner Whisperer
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
|
should take under 30 mins while drinking a beer and bullsh*ting with the neighbor
__________________________________________________
Goal: Shake A Million Hands | Look through the corners | Track Day Prep | Closest track? | The Mid-Ohio School |
|
March 21st, 2012, 04:46 PM | #1657 |
ninjette.org guru
Name: andrew
Location: oakdale california
Join Date: Nov 2011 Motorcycle(s): 2012 ninja 250 Posts: 296
|
Galfer Stainless Steel Hydraulic Front Brake Line
http://www.motorcycle-superstore.com...50R-Parts.aspx (not sure if link worked). cheapest one I seen |
|
March 21st, 2012, 04:59 PM | #1658 |
ninjette.org certified postwhore
Name: .
Location: .
Join Date: Feb 2011 Motorcycle(s): . Posts: Too much.
MOTM - Feb '13, Feb '14
|
|
|
March 21st, 2012, 05:55 PM | #1659 |
?>ninja = i think not
Name: Xavier
Location: Gwinnett
Join Date: Jan 2012 Motorcycle(s): ninja 250 NINJA 650 Posts: 91
|
|
|
March 21st, 2012, 06:02 PM | #1660 |
Super Noob
Name: Alex
Location: Mobile, AL
Join Date: Oct 2011 Motorcycle(s): '09 Kawasaki Ninja 250R, '84 Honda Spree 50cc Posts: A lot.
|
I have cleaned my air filter 4 times now (I'm at 4400 ish miles currently) and I've noticed that removing the air box lid is getting successively harder each time I remove it. It's like the metal holes the hex screws screw into are digging into the plastic of the lid....has anyone noticed this/had this happen?
|
|
March 21st, 2012, 06:06 PM | #1661 |
The Corner Whisperer
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
|
I lead the group for the 3rd day in a row! 8 bikes hitting the canyons and a the only 250 sets the pace. lol
The guy on the Ducati said "Damn!".
__________________________________________________
Goal: Shake A Million Hands | Look through the corners | Track Day Prep | Closest track? | The Mid-Ohio School |
|
March 21st, 2012, 06:07 PM | #1662 | |
?>ninja = i think not
Name: Xavier
Location: Gwinnett
Join Date: Jan 2012 Motorcycle(s): ninja 250 NINJA 650 Posts: 91
|
Quote:
I havent had that problem tho, in out on with my life |
|
|
March 21st, 2012, 06:10 PM | #1663 |
ninjette.org certified postwhore
Name: .
Location: .
Join Date: Feb 2011 Motorcycle(s): . Posts: Too much.
MOTM - Feb '13, Feb '14
|
|
|
March 21st, 2012, 06:18 PM | #1664 |
The Corner Whisperer
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
|
@choneofakind 4 of the 8 could be at the track with us, Mid-O is popular with this group.
I "let" (hahahahah) a R1 in front for a bit. Trying to get the vid from him (rear facing cam). I will forewarn you... it's not my normal street riding. New thread to follow with video, so you all can bash me for being an lol
__________________________________________________
Goal: Shake A Million Hands | Look through the corners | Track Day Prep | Closest track? | The Mid-Ohio School |
|
March 21st, 2012, 06:33 PM | #1665 |
ninjette.org certified postwhore
Name: .
Location: .
Join Date: Feb 2011 Motorcycle(s): . Posts: Too much.
MOTM - Feb '13, Feb '14
|
uhhhh huh, sure! we'll let the video do the talking. I keep my squidly vids off youtube for a reason
I can't wait!!!! I want to meet cool people on fun bikes!! as long as they don't mind chillin with the college kid on the 16 year old bike... side note: I can't recall ever actually ever seeing one of the new R1's on the road, only at the motorcycle show |
|
March 21st, 2012, 08:02 PM | #1666 |
ninjette.org guru
Name: Paul
Location: Midwest
Join Date: Oct 2011 Motorcycle(s): 1999 Kawasaki ZRX1100, 2006 Yamaha R1, 2006 Kawasaki ZZR600, 2009 Kawasaki Ninja 250R, 2017 Kawasaki Z900 Posts: 320
|
Installed Dynojet jet kit, reinstalled the carbs, installed Shogun frame sliders, did the Kleen removal mod using a block off plate. Finally...some progress.
|
|
March 22nd, 2012, 11:53 PM | #1667 |
YEAH! Custom name tag.
Name: Jon
Location: CT
Join Date: Jul 2010 Motorcycle(s): 2010 Ninja 250R SE- SOLD to maverick9611 Posts: 525
|
I topped off my coolant reservoir with some distilled water
__________________________________________________
Don't touch it. Don't even look at it. Go on, get out, you heard me. Don't look at me either. Yeah, you better walk on. I'll hit an old man in public. |
|
March 23rd, 2012, 12:55 AM | #1668 |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
Rebuilt forks. May have used the wrong fork oil (5W). The service manual does not specify a fork oil weight ("KAYABA SS-8").
Same here. I reset a fitting at the upper right but I still seem to be leaking from the lower left fitting. |
|
March 23rd, 2012, 11:04 AM | #1669 |
ninjette.org certified postwhore
Name: Morgan
Location: A city twinned with Kawasaki
Join Date: Nov 2011 Motorcycle(s): '08 Ninja 250, 2010 STR 675 Posts: A lot.
Blog Entries: 1
|
Took it half way across the country, then back an hour later...
Motorways are no fun But the last 40 miles where I turned off to find petrol & found twistys to go with it |
|
March 23rd, 2012, 09:48 PM | #1670 |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
Mined the service manual for torque values and other little things I needed to finish up work on the bike; left to go buy Molybdenum Disulfide grease, service-removable thread locker, disposable funnels (couldn't find any), some 1/2" PVC caps to use as pre-load spacers, 10x1.25mm bolts with sleeves to use as spools, high-temp liquid gasket, etc, etc, etc. The little stuff adds up.
|
|
March 24th, 2012, 09:43 AM | #1671 |
Super Noob
Name: Alex
Location: Mobile, AL
Join Date: Oct 2011 Motorcycle(s): '09 Kawasaki Ninja 250R, '84 Honda Spree 50cc Posts: A lot.
|
Cleaned and adjusted my drive chain (the thing was more than 2 inches outside the recommended range on the loose side ) and OH!...Since I've decided to go sticker crazy on my bike, I started out with Kawi logos on the underside of main faring and the sides of the front cowl (which I would like to think is unique ).
|
|
March 24th, 2012, 10:03 AM | #1672 | |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
Quote:
|
|
|
March 24th, 2012, 10:14 AM | #1673 |
1/4 English, 3/4 Kick Ass
Name: Jeremy
Location: Dayton, OH
Join Date: Sep 2011 Motorcycle(s): 2002 Triumph Speed Triple 955i, '05 Suzuki SV650S(retired), '11 Ninja 250R(sold) Posts: A lot.
|
Changed the front brake pads and gonna give her a good cleaning after the rain.
|
|
March 24th, 2012, 11:42 AM | #1674 |
ninjette.org member
Name: Tej
Location: Ludhiana, India
Join Date: Dec 2011 Motorcycle(s): Black 2011 Ninja 250R FI Posts: 102
|
i did .. this
__________________________________________________
dat road rash game |
|
March 24th, 2012, 11:48 AM | #1675 |
ninjette.org sage
Name: Benji
Location: Wadsworth, IL
Join Date: Aug 2011 Motorcycle(s): 2009 Ninja 250r (Sold), 2009 FZ6, 2015 Honda Grom Posts: 898
|
Yikes!
I was going to install jets into my bike today, but realized I'll have to remove the carbs to do it. Doesn't seem to be possible to do without removing them since I still have the air box. |
|
March 24th, 2012, 12:10 PM | #1676 |
ninjette.org certified postwhore
Name: .
Location: .
Join Date: Feb 2011 Motorcycle(s): . Posts: Too much.
MOTM - Feb '13, Feb '14
|
Benji, it's doable, just not fun. take your time and don't get mad at it.
the other option is to just remove the airbox and go with the pod filter |
|
March 24th, 2012, 12:49 PM | #1677 |
ninjette.org sage
Name: Benji
Location: Wadsworth, IL
Join Date: Aug 2011 Motorcycle(s): 2009 Ninja 250r (Sold), 2009 FZ6, 2015 Honda Grom Posts: 898
|
I planned on doing the pod filter eventually, but don't have stands for the bike currently. That'll probably be something I do in may. Hopefully it's not too hard to get the carbs out with the air box on. I'v seen a DIY of someone doing it so..
|
|
March 25th, 2012, 11:08 AM | #1678 | |
ninjette.org guru
Name: Ed
Location: San Diego
Join Date: Mar 2012 Motorcycle(s): '08 Ninja 250R (SOLD - 2/16/2013) Posts: 492
|
Quote:
As for me, I cleaned and lubed my bike's chain. Waiting on the oil filter to do oil change, and to run through a whole tank with seafoam to change the plugs |
|
|
March 25th, 2012, 12:26 PM | #1679 | |
ninjette.org certified postwhore
Name: .
Location: .
Join Date: Feb 2011 Motorcycle(s): . Posts: Too much.
MOTM - Feb '13, Feb '14
|
Quote:
So yes, re-jetted. |
|
|
March 25th, 2012, 06:55 PM | #1680 |
ninjette.org guru
Name: Paul
Location: Midwest
Join Date: Oct 2011 Motorcycle(s): 1999 Kawasaki ZRX1100, 2006 Yamaha R1, 2006 Kawasaki ZZR600, 2009 Kawasaki Ninja 250R, 2017 Kawasaki Z900 Posts: 320
|
Had a really productive day today. I painted the spot where I ground off the kickstand. Finished installing the SV Racing rear sets and Woodcraft clip ons with some lock tite. Made the safety wire choke mod. Reinstalled the gas tank after I picked it up from the painter. Fired it up for the first time since I put on the jet kit and it ran great...woo hoo! I installed the newly painted race bodywork. Put on some Gripster grip pads. And to top it off, I put on some green rim tape
IMG_0595.jpg IMG_0596.jpg |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Discovered something scary about my Ninjette today... | kjohng | General Motorcycling Discussion | 28 | October 15th, 2021 01:40 PM |
Sold the 2006 Ninjette today :( | Renner | General Motorcycling Discussion | 31 | October 16th, 2014 11:46 PM |
Today I Gave My Ninjette Wings! | BlueHairSar | Pictures | 5 | June 20th, 2013 07:38 AM |
my bro went down today on his ninjette | richierich781 | !%@*#$%!)@#&!%@ I crashed! | 46 | January 18th, 2013 11:59 AM |
Ninjette. org hacked today | CC Cowboy | Off-Topic | 9 | April 3rd, 2011 08:55 AM |
|
|