March 21st, 2016, 04:14 AM | #1 |
ninjette.org newbie
Name: darcy
Location: honolulu hawaii
Join Date: Mar 2016 Motorcycle(s): 2005 kawasaki ninja zx10r Posts: 2
|
help!!!
wassup everybody need help...my 2005 zx10r was stolen and when the cops recovered it whoever took it cut the main wire harness that runs undr rear seat to brake and signal lites and they took the power commander and now it wont start...could it b becuse theres no power commander that it wont start???and does anyone no where i could find wiring diagrams for reconnecting rear brake and signal lites???
|
|
March 21st, 2016, 07:36 AM | #2 |
The Corner Whisperer
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
|
Welcome Darcy!
Assuming everything is in tact with the stock wire harness, you can just unplug the the cut pc wires and plug back in the stock connectors. Should be pretty simple really and there are only 1000 youtube videos. I will see if I can find a wiring diagram. Sorry about the bike though... but at least you got it back!
__________________________________________________
Goal: Shake A Million Hands | Look through the corners | Track Day Prep | Closest track? | The Mid-Ohio School |
1 out of 1 members found this post helpful. |
March 21st, 2016, 10:28 AM | #3 |
I'm crazy,your excuse is?
Name: Winston
Location: Connecticut
Join Date: May 2013 Motorcycle(s): 250 2007 ninja Posts: A lot.
|
welcome and sorry for your troubles. perhaps you can get a good used wire harness.
Ninjette ones usually run under $50 used. |
|
March 21st, 2016, 07:35 PM | #4 |
ninjette.org newbie
Name: darcy
Location: honolulu hawaii
Join Date: Mar 2016 Motorcycle(s): 2005 kawasaki ninja zx10r Posts: 2
|
yah i got it bak but da dummeh dat took it slid on da bike kuzz da rite side of bike is all scratched...thnx fo ur help guyz
|
|