July 2nd, 2014, 05:44 PM | #1 |
ninjette.org member
Name: Kyle
Location: Independence, WI
Join Date: Apr 2014 Motorcycle(s): 2010 Kawasaki Ninja 250R Posts: 37
|
Shimming the carb needles
What does shimming the needles actually do to improve how the bike runs?
|
|
July 2nd, 2014, 06:12 PM | #2 |
Threadkiller
Name: Mick
Location: Monongahela, Pa.
Join Date: Apr 2014 Motorcycle(s): Yellow '04 stocker, '89 FJ1200, '87 Ducati Paso, '71 Yamaha XS1b, '99 KLR650, '81 FXE 80, '97 KTM 200EXC , etc Posts: 430
|
|
|
July 2nd, 2014, 06:14 PM | #3 |
I'm crazy,your excuse is?
Name: Winston
Location: Connecticut
Join Date: May 2013 Motorcycle(s): 250 2007 ninja Posts: A lot.
|
Our bikes are set up from the factory too lean(not enough gas going ins), the needle in question blocks off fuel in the carb, as it is raised it enriches the fuel mixture getting the mid throttle power where it should be.
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Shimming the Carb Needles... Is it for You? | kkim | 2008 - 2012 Ninja 250R Tech Talk | 93 | June 10th, 2018 05:25 PM |
DIY Shimming the carb needles. | Viper-Byte | 2008 - 2012 Ninja 250R Tech Talk | 1078 | April 17th, 2014 10:16 PM |
DJ Needles instead of shimming | mxman38 | 2008 - 2012 Ninja 250R Tech Talk | 7 | May 30th, 2012 07:09 PM |
Need help on shimming carb needles | RedNinja21 | 2008 - 2012 Ninja 250R Tech Talk | 6 | October 27th, 2011 10:16 AM |
FREE!!! 3MM Washers for Shimming Your Carb Needles | kkim | 2008 - 2012 Ninja 250R Tech Talk | 1 | September 10th, 2010 02:26 AM |
|
|