April 24th, 2014, 07:28 AM | #1 |
I'm crazy,your excuse is?
Name: Winston
Location: Connecticut
Join Date: May 2013 Motorcycle(s): 250 2007 ninja Posts: A lot.
|
someone bored and can take measurement ASAP pregen under seat rail width?
My pregen is at home and figured maybe someone is equally bored as I am lazy...
Need the outside width of frame rails under seat right by the tank. |
|
April 24th, 2014, 07:37 AM | #2 |
The Corner Whisperer
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
|
Give me a few mins.
__________________________________________________
Goal: Shake A Million Hands | Look through the corners | Track Day Prep | Closest track? | The Mid-Ohio School |
|
April 24th, 2014, 07:49 AM | #3 |
The Corner Whisperer
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
|
.
__________________________________________________
Goal: Shake A Million Hands | Look through the corners | Track Day Prep | Closest track? | The Mid-Ohio School |
|
April 24th, 2014, 08:00 AM | #4 |
I'm crazy,your excuse is?
Name: Winston
Location: Connecticut
Join Date: May 2013 Motorcycle(s): 250 2007 ninja Posts: A lot.
|
ok meng thank you!
Next time you are bored, can I have the width at the widest part of the rear seat frame? |
|
April 24th, 2014, 12:30 PM | #5 |
The Corner Whisperer
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
|
.
__________________________________________________
Goal: Shake A Million Hands | Look through the corners | Track Day Prep | Closest track? | The Mid-Ohio School |
|
April 24th, 2014, 01:35 PM | #6 |
I'm crazy,your excuse is?
Name: Winston
Location: Connecticut
Join Date: May 2013 Motorcycle(s): 250 2007 ninja Posts: A lot.
|
thanks! Thinking about changing the looks of this giant moped, looks like will need at least a 9 inch wide cafe seat.
Owe you a beer. |
|
April 24th, 2014, 01:36 PM | #7 |
The Corner Whisperer
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
|
__________________________________________________
Goal: Shake A Million Hands | Look through the corners | Track Day Prep | Closest track? | The Mid-Ohio School |
|
April 24th, 2014, 06:44 PM | #8 |
I'm crazy,your excuse is?
Name: Winston
Location: Connecticut
Join Date: May 2013 Motorcycle(s): 250 2007 ninja Posts: A lot.
|
OK more measurements request the diameter of the naked speedo, tach and the temp gauges. I have some stupid ideas that will probably end up nowhere.
|
|
April 24th, 2014, 08:22 PM | #9 |
The Corner Whisperer
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
|
Oh, snap. Not sure I have a stock pregen dash. Lemme look through my parts bin in the AM.
__________________________________________________
Goal: Shake A Million Hands | Look through the corners | Track Day Prep | Closest track? | The Mid-Ohio School |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Seat height and width | archaeofreak | General Motorcycling Discussion | 23 | July 4th, 2017 11:07 PM |
Comfortable Pillion Seat, Grab Rail/Pack Racks for 250R 2012 | aayushkr | 2008 - 2012 Ninja 250R Farkles | 1 | August 13th, 2012 03:56 PM |
Need pregen tail light assy. ASAP | CynicalC | Items Wanted | 0 | March 16th, 2012 12:40 AM |
want pregen seat dimiensions | alex.s | 1986 - 2007 Ninja 250R Tech Talk | 4 | August 21st, 2011 08:31 PM |
PreGen Corbin Seat | Trillian | Items Wanted | 2 | August 21st, 2011 02:25 PM |
|
|