What Did You Do to Your Ninjette Today ?? - Page 139

CZroe · May 13th, 2014, 05:15 AM

Quote:

Originally Posted by allanoue

I think they bent a bracket out a bit. Not sure.

Thread here on it
https://www.ninjette.org/forums/showthread.php?t=161600

Thanks!

NaMeTaKeN33 · May 13th, 2014, 07:33 AM

Let's see if I can be more active on these forums.

Clean and lube chain
Fixed front right turn signal (wasn't blinking, loose wire)
Removed gas cap and cleaned the locking mechanism and ordered a keyless gas cap (live in apt and I guess my cover didn't protect the moisture too well and was unable to unlock the cap)

sharky nrk · May 13th, 2014, 08:12 AM

left her in the garage, it was nasty out this morning lol

auntymunga · May 13th, 2014, 01:03 PM

We went for a lovely ride to work, to the shops, back to work and then home. Then when we got home, I decided to spray the rims because it was the last thing I needed to do to my ninjette.

Good day

CraigRR · May 13th, 2014, 06:07 PM

Light weight battery.

CraigRR · May 13th, 2014, 06:10 PM

Pro Bolt light weight engine case bolts.

mgentz · May 13th, 2014, 06:33 PM

Quote:

Originally Posted by CraigRR

Light weight battery.

ballistic or alien motion?

mgentz · May 13th, 2014, 06:34 PM

Quote:

Originally Posted by CraigRR

Pro Bolt light weight engine case bolts.

aluminum or titanium?

Come on man!

CraigRR · May 13th, 2014, 06:36 PM

Quote:

Originally Posted by mgentz

ballistic or alien motion?

Ballistic.

CraigRR · May 13th, 2014, 06:37 PM

Quote:

Originally Posted by mgentz

aluminum or titanium?

Come on man!

Aluminum. I siliconed them during recommended torque.

melfice · May 13th, 2014, 08:02 PM

200 mile drive from VA to NC. switched out faceshields halfway through due to it being covered in dead bugs. by the time i made it home the whole front end was bug city lol.

YellowNinja · May 13th, 2014, 08:18 PM

Rode 80 miles to take the road test, and passed, another 50 miles to the dealer to pick up the plates, and 50 miles back home...fun day

cuong-nutz · May 13th, 2014, 09:15 PM

New turn signals finally came in. Bike can be whole again after losing it at the track....two years ago.

#maverick# · May 13th, 2014, 09:18 PM

Changed my oil today because my jackstand came in. Proton flush mount also came in

CZroe · May 13th, 2014, 09:45 PM

Quote:

Originally Posted by psych0hans

Cut off the toe peg feeler thingies because they were scraping at the track, causing me to run off...

But... they screw on/off.

menikmati · May 14th, 2014, 08:54 AM

Ordered a new OEM LH fairing, plastic rivets and bolts.

psych0hans · May 14th, 2014, 09:18 AM

Quote:

Originally Posted by CZroe

But... they screw on/off.

crazymadbastard · May 14th, 2014, 11:17 AM

Quote:

Originally Posted by CraigRR

Pro Bolt light weight engine case bolts.

shoulda put helium in the tires too!

CraigRR · May 14th, 2014, 11:21 AM

Quote:

Originally Posted by crazymadbastard

shoulda put helium in the tires too!

Lol.

cbinker · May 14th, 2014, 11:21 AM

looked at her, then she squeaked at me.

mgentz · May 14th, 2014, 11:26 AM

Quote:

Originally Posted by cbinker

looked at her, then she squeaked at me.

I get that too!

tfkrocks · May 14th, 2014, 12:04 PM

Finally have full fairings again and installed an Area P full exhaust and PCV

melfice · May 14th, 2014, 05:46 PM

After stripping two out of eight screws, and loosening my boss to move things around and get a good angle to remove said screws, I Shimmed my carbs finally! With only two washers. I'll take off my snorkel tomorrow.

tfkrocks · May 15th, 2014, 01:50 AM

I love the sound of the Area P exhaust. Turning the bike on got more exciting. Bike feels smoother overall with the full exhaust and tune. I like

mgentz · May 15th, 2014, 05:30 AM

congrats

allanoue · May 15th, 2014, 06:41 AM

Quote:

Originally Posted by tfkrocks

I love the sound of the Area P exhaust. Turning the bike on got more exciting. Bike feels smoother overall with the full exhaust and tune. I like

I do love the sounds it makes also. So sweet. The MoPowa is nice too

mgentz · May 15th, 2014, 07:45 AM

Quote:

Originally Posted by allanoue

I do love the sounds it makes also. So sweet. The MoPowa is nice too

NOT KNOCKING THE AREA P.....but you should hear the Leo Vince. It is sexy.

CZroe · May 15th, 2014, 06:19 PM

Quote:

Originally Posted by melfice

After stripping two out of eight screws, and loosening my boss to move things around and get a good angle to remove said screws, I Shimmed my carbs finally! With only two washers. I'll take off my snorkel tomorrow.

*clearsthroat*

Quote:

Originally Posted by CZroe

JIS screws...
STRIKE AGAIN!

agentbad · May 15th, 2014, 06:22 PM

Tightened the chain and realigned the back wheel. Feels much smoother with shifts but still getting a little drive lash from the wheel. Cush drive seems loose should I shim it?

cuong-nutz · May 15th, 2014, 08:34 PM

Drained some oil and put more in. I need to tear into my carbs again and see what's causing fuel to leak into my oil.

Kscreations08 · May 15th, 2014, 08:45 PM

rolled it into the garage. Weather man is calling for 24 hours of tearfall

cbinker · May 15th, 2014, 10:26 PM

pushed it out of the way to find a part for my ZX6R.

mgentz · May 16th, 2014, 04:32 AM

Looked at it

Insane Pie · May 16th, 2014, 05:00 AM

Watched my front fender fly off..that was fun.

NevadaWolf · May 16th, 2014, 05:36 AM

Quote:

Originally Posted by Insane Pie

Watched my front fender fly off..that was fun.

Uhhh story time?

LittleRedNinjette · May 16th, 2014, 05:46 AM

sharky nrk · May 16th, 2014, 06:19 AM

fluid flush and bled the brakes, installed like on the rear, general once over for track prep on the trackbike

another commute day of abuse to the street bike

cbinker · May 16th, 2014, 09:41 AM

Still waiting for my front sprocket!

mgentz · May 16th, 2014, 01:41 PM

national back order on valve seals.....just found some on eBay! whoo hoo!

ninjanewby · May 16th, 2014, 08:35 PM

Gave her a sponge bath. In the sunshine with a beer in hand.

May 13th, 2014, 07:33 AM	#5522
NaMeTaKeN33 ninjette.org member Name: Phil Location: Austin, Tx Join Date: Jul 2013 Motorcycle(s): 2006 Kawasaki Ninja 250 Posts: 12	Let's see if I can be more active on these forums. Clean and lube chain Fixed front right turn signal (wasn't blinking, loose wire) Removed gas cap and cleaned the locking mechanism and ordered a keyless gas cap (live in apt and I guess my cover didn't protect the moisture too well and was unable to unlock the cap)

May 13th, 2014, 08:12 AM	#5523
sharky nrk Fighting Texas Aggie '05 Name: Neil Location: Hutto, TX Join Date: Feb 2009 Motorcycle(s): '07 ZX6R, '08 Versys, '09 250R Track, '93 F2/F3 Track Posts: A lot.	left her in the garage, it was nasty out this morning lol __________________________________________________ Keep it rubber side down and enjoy the ride Get healthy - Get Fit - Change Your Life Click Here Or PM Me To Find More - Advocare

May 13th, 2014, 01:03 PM	#5524
auntymunga ninjette.org member Name: Samantha Location: Johannesburg Join Date: Mar 2014 Motorcycle(s): 2008 250r Ninja Posts: 67	We went for a lovely ride to work, to the shops, back to work and then home. Then when we got home, I decided to spray the rims because it was the last thing I needed to do to my ninjette. Good day
	1 out of 1 members found this post helpful.

May 13th, 2014, 08:02 PM	#5531
melfice yes, I'm famous. Name: matt Location: Norfolk, VA Join Date: Nov 2012 Motorcycle(s): 2009 Ninjette 250R Posts: 80	200 mile drive from VA to NC. switched out faceshields halfway through due to it being covered in dead bugs. by the time i made it home the whole front end was bug city lol. __________________________________________________ I cant wheelie and that makes me sad.

May 13th, 2014, 09:15 PM	#5533
cuong-nutz RIP Alex Name: Cuong Location: Houston, TX Join Date: Apr 2011 Motorcycle(s): '10 250r, '09 265r Posts: A lot. Blog Entries: 2	New turn signals finally came in. Bike can be whole again after losing it at the track....two years ago. __________________________________________________ HalfFast Racing Team Serving Greater Houston Area Riders:WFO Riders MotoHouston HPC CMRA Ride Smart Fastline Lone Star Track Days

May 13th, 2014, 08:18 PM	#5532
YellowNinja ninjette.org newbie Name: Jill Location: Centennial, CO Join Date: Apr 2014 Motorcycle(s): 2012 Ninja 250R Posts: 8	Rode 80 miles to take the road test, and passed, another 50 miles to the dealer to pick up the plates, and 50 miles back home...fun day

May 13th, 2014, 09:18 PM	#5534
#maverick# ninjette.org member Name: Ben Location: Chicago Join Date: May 2014 Motorcycle(s): 2009 Ninja 250r Posts: 18	Changed my oil today because my jackstand came in. Proton flush mount also came in

May 14th, 2014, 08:54 AM	#5536
menikmati crash 250, get supersport Name: Richard Location: San Diego, CA Join Date: Apr 2010 Motorcycle(s): 2010 250R SE (Sold 6/9/14), 2009 ZX-6R (Sold 6/25/14), Subaru BRZ Posts: A lot.	Ordered a new OEM LH fairing, plastic rivets and bolts. __________________________________________________

May 14th, 2014, 11:21 AM	#5540
cbinker Track Clown Name: Chris Location: Kingman, AZ Join Date: May 2012 Motorcycle(s): '08 250R, 21 MV F3 800, Kawasaki 400 build Posts: A lot. MOTM - Sep '15	looked at her, then she squeaked at me. __________________________________________________ TEAM ALFALFA www.apexassassins.com

May 14th, 2014, 12:04 PM	#5542
tfkrocks ninjette.org certified postwhore Name: Rebecca Location: SF Bay Area Join Date: Sep 2009 Motorcycle(s): 2013 Ninja 300 w/ ABS, 2014 NC700X, 2008 Ninja 250 (sold), 2002 Ninja 250 (sold) Posts: A lot. MOTM - Jan '18, Sep '13	Finally have full fairings again and installed an Area P full exhaust and PCV
	1 out of 1 members found this post helpful.

May 14th, 2014, 05:46 PM	#5543
melfice yes, I'm famous. Name: matt Location: Norfolk, VA Join Date: Nov 2012 Motorcycle(s): 2009 Ninjette 250R Posts: 80	After stripping two out of eight screws, and loosening my boss to move things around and get a good angle to remove said screws, I Shimmed my carbs finally! With only two washers. I'll take off my snorkel tomorrow. __________________________________________________ I cant wheelie and that makes me sad.

May 15th, 2014, 01:50 AM	#5544
tfkrocks ninjette.org certified postwhore Name: Rebecca Location: SF Bay Area Join Date: Sep 2009 Motorcycle(s): 2013 Ninja 300 w/ ABS, 2014 NC700X, 2008 Ninja 250 (sold), 2002 Ninja 250 (sold) Posts: A lot. MOTM - Jan '18, Sep '13	I love the sound of the Area P exhaust. Turning the bike on got more exciting. Bike feels smoother overall with the full exhaust and tune. I like
	1 out of 1 members found this post helpful.

May 15th, 2014, 05:30 AM	#5545
mgentz Board Member Name: ... Location: WI Join Date: Dec 2011 Motorcycle(s): 250R (street), 250R (dirt) Posts: A lot.	congrats

May 15th, 2014, 06:22 PM	#5549
agentbad ninjette.org sage Name: bob Location: Earf Join Date: Apr 2013 Motorcycle(s): 2005 Ninja 250, 2006 SV650N Posts: 642	Tightened the chain and realigned the back wheel. Feels much smoother with shifts but still getting a little drive lash from the wheel. Cush drive seems loose should I shim it?

May 15th, 2014, 08:34 PM	#5550
cuong-nutz RIP Alex Name: Cuong Location: Houston, TX Join Date: Apr 2011 Motorcycle(s): '10 250r, '09 265r Posts: A lot. Blog Entries: 2	Drained some oil and put more in. I need to tear into my carbs again and see what's causing fuel to leak into my oil. __________________________________________________ HalfFast Racing Team Serving Greater Houston Area Riders:WFO Riders MotoHouston HPC CMRA Ride Smart Fastline Lone Star Track Days

May 15th, 2014, 08:45 PM	#5551
Kscreations08 Fresh Deli Meat Name: Kevin Location: Wilkes-Barre, Pennsylvania Join Date: Feb 2014 Motorcycle(s): 2009 250R Ninja -Neener- Posts: 678	rolled it into the garage. Weather man is calling for 24 hours of tearfall __________________________________________________ We shall call thee "Seahorse." -Antiant on Couvade Syndrome

May 15th, 2014, 10:26 PM	#5552
cbinker Track Clown Name: Chris Location: Kingman, AZ Join Date: May 2012 Motorcycle(s): '08 250R, 21 MV F3 800, Kawasaki 400 build Posts: A lot. MOTM - Sep '15	pushed it out of the way to find a part for my ZX6R. __________________________________________________ TEAM ALFALFA www.apexassassins.com

May 16th, 2014, 04:32 AM	#5553
mgentz Board Member Name: ... Location: WI Join Date: Dec 2011 Motorcycle(s): 250R (street), 250R (dirt) Posts: A lot.	Looked at it

May 16th, 2014, 05:00 AM	#5554
Insane Pie ninjette.org member Name: Alex Location: Las Vegas Join Date: Apr 2014 Motorcycle(s): '08 Ninja 250 Posts: 132	Watched my front fender fly off..that was fun.

May 16th, 2014, 05:46 AM	#5556
LittleRedNinjette Certified Troublemaker Name: Teri Location: Hamilton, NJ Join Date: Oct 2012 Motorcycle(s): 2006 Ninja 250r "Pikachu", 2017 Ninja 650 "Epona" Posts: A lot. MOTM - Aug '13, Aug '14, Feb '17	__________________________________________________ Raven's Rejuvenation A bruise is a lesson... and each lesson makes us better...

May 16th, 2014, 06:19 AM	#5557
sharky nrk Fighting Texas Aggie '05 Name: Neil Location: Hutto, TX Join Date: Feb 2009 Motorcycle(s): '07 ZX6R, '08 Versys, '09 250R Track, '93 F2/F3 Track Posts: A lot.	fluid flush and bled the brakes, installed like on the rear, general once over for track prep on the trackbike another commute day of abuse to the street bike __________________________________________________ Keep it rubber side down and enjoy the ride Get healthy - Get Fit - Change Your Life Click Here Or PM Me To Find More - Advocare

May 16th, 2014, 09:41 AM	#5558
cbinker Track Clown Name: Chris Location: Kingman, AZ Join Date: May 2012 Motorcycle(s): '08 250R, 21 MV F3 800, Kawasaki 400 build Posts: A lot. MOTM - Sep '15	Still waiting for my front sprocket! __________________________________________________ TEAM ALFALFA www.apexassassins.com

May 16th, 2014, 01:41 PM	#5559
mgentz Board Member Name: ... Location: WI Join Date: Dec 2011 Motorcycle(s): 250R (street), 250R (dirt) Posts: A lot.	national back order on valve seals.....just found some on eBay! whoo hoo!

May 16th, 2014, 08:35 PM	#5560
ninjanewby ninjette.org member Name: Jimmy Location: Coffs Harbour Join Date: Apr 2014 Motorcycle(s): Ninja 300 Posts: 23	Gave her a sponge bath. In the sunshine with a beer in hand.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Discovered something scary about my Ninjette today...	kjohng	General Motorcycling Discussion	28	October 15th, 2021 01:40 PM
Sold the 2006 Ninjette today :(	Renner	General Motorcycling Discussion	31	October 16th, 2014 11:46 PM
Today I Gave My Ninjette Wings!	BlueHairSar	Pictures	5	June 20th, 2013 07:38 AM
my bro went down today on his ninjette	richierich781	!%@*#$%!)@#&!%@ I crashed!	46	January 18th, 2013 11:59 AM
Ninjette. org hacked today	CC Cowboy	Off-Topic	9	April 3rd, 2011 08:55 AM