November 7th, 2014, 03:40 PM | #81 | |
modaholic junkie
Name: Nick
Location: Athens, Greece
Join Date: Sep 2012 Motorcycle(s): 2001 ZX-12R, 2009 ninja 345cc and plenty of others in the past... Posts: 438
Blog Entries: 2
|
Quote:
1,2mm Bruce...I messed up when converting to inches... that is 0,05"... when you say excessive, you mean unecessarily too much ? my intention is to keep compression below 13:1 and to be able to adjust lobe centers any way I want...that 3mm is on TDC without cams on... will see how much it really is when cam timing is done...
__________________________________________________
If noone has tried it before, I will !!! |
|
|
November 10th, 2014, 09:06 AM | #82 | |
ninjette.org sage
Name: bruce
Location: northern illinois
Join Date: Jan 2012 Motorcycle(s): Race bikes:08 Ninja 250,11 R6,16 ZX6,SV650.3 HD-1947,2-2003,2010. 1946 Indian and a lot of dirt bikes.2 Posts: 999
|
Quote:
|
|
|
November 11th, 2014, 05:50 AM | #83 | |
modaholic junkie
Name: Nick
Location: Athens, Greece
Join Date: Sep 2012 Motorcycle(s): 2001 ZX-12R, 2009 ninja 345cc and plenty of others in the past... Posts: 438
Blog Entries: 2
|
Quote:
had to order special shims and that is holding me back at the moment but I believe it will be on the bike by the end of the week...
__________________________________________________
If noone has tried it before, I will !!! Last futzed with by micoulisninja; November 11th, 2014 at 10:42 PM. |
|
|
November 11th, 2014, 04:54 PM | #84 | |
ninjette.org sage
Name: bruce
Location: northern illinois
Join Date: Jan 2012 Motorcycle(s): Race bikes:08 Ninja 250,11 R6,16 ZX6,SV650.3 HD-1947,2-2003,2010. 1946 Indian and a lot of dirt bikes.2 Posts: 999
|
Quote:
|
|
|
November 11th, 2014, 10:37 PM | #85 | |
modaholic junkie
Name: Nick
Location: Athens, Greece
Join Date: Sep 2012 Motorcycle(s): 2001 ZX-12R, 2009 ninja 345cc and plenty of others in the past... Posts: 438
Blog Entries: 2
|
Quote:
it seems odd to me though that you didn't order a custom one yourself... there are some good gasket makers over there, I believe... or is it too expensive to make just one piece ?
__________________________________________________
If noone has tried it before, I will !!! |
|
|
November 17th, 2014, 08:18 AM | #86 |
Freedom for Germany
Location: This World
Join Date: May 2011 Motorcycle(s): Ninja 250R-FI Posts: A lot.
|
Nick, take a look what I found for you...
Link: http://parts-for-bikes.de/shop/einze...baab6c028.html I know you don't like to hear about the ECU but I know from a guy in Germany with a K8 750 Gixxer who is using those (but open w/o net) and remapped his ECU what gave him around 11% more hp (from 138 stock-hp to 153 hp actual), so don't forget about the ECU... |
|
November 17th, 2014, 04:23 PM | #87 | |
modaholic junkie
Name: Nick
Location: Athens, Greece
Join Date: Sep 2012 Motorcycle(s): 2001 ZX-12R, 2009 ninja 345cc and plenty of others in the past... Posts: 438
Blog Entries: 2
|
Quote:
Well I wasn't going to use any filter anyway... but no net...ok, dust is not any serious issue maybe, but what about debris going to the engine ?? Seems to me you are in favor of the "no airbox" option as well...
__________________________________________________
If noone has tried it before, I will !!! |
|
|
November 17th, 2014, 05:50 PM | #88 | |
Freedom for Germany
Location: This World
Join Date: May 2011 Motorcycle(s): Ninja 250R-FI Posts: A lot.
|
Quote:
also when I'm one day to late I wish you all the best, stay healthy and have good luck. No, I'm not in favor of "no airbox" but in your case it would be good to test different velocity stacks for the best success. |
|
|
November 17th, 2014, 08:18 PM | #89 |
ninjette.org member
Name: red
Location: KL, Malaysia
Join Date: Apr 2013 Motorcycle(s): Ninja 250R, GSXR600 K4, KX250F,NSR150SP, Yamaha TZM150 Posts: 68
|
those DNA filters seems quite good as it is used in the Ninja Cup bikes we have here.
It's like the K&N pods but with shield and also filter for the engine breather. It looks like it have the velocity improved but i can only see it from the outside. |
|
November 20th, 2014, 09:35 AM | #90 |
modaholic junkie
Name: Nick
Location: Athens, Greece
Join Date: Sep 2012 Motorcycle(s): 2001 ZX-12R, 2009 ninja 345cc and plenty of others in the past... Posts: 438
Blog Entries: 2
|
Red the DNA stage 2 filterkit is probably the best in the market for the 250... but it is made for the 250's TBs and quite expensive... it will definetely need modification to fit to the 300's TBs that might ruin the whole functionality of the kit... I have no time at the moment so I have not been working on the bike but will soon complete it... when it comes to finalising mounting stuff, I will try evrthing that comes with breathing... several kinds of velocity stacks along with my modded airbox, filterpods etc and see what performs best...
__________________________________________________
If noone has tried it before, I will !!! |
|
November 21st, 2014, 12:39 AM | #91 |
ninjette.org member
Name: red
Location: KL, Malaysia
Join Date: Apr 2013 Motorcycle(s): Ninja 250R, GSXR600 K4, KX250F,NSR150SP, Yamaha TZM150 Posts: 68
|
ah..you're correct on this.i just realized it as i was trying to borrow the 2013 250 TB from a buddy and find it is VERY different. the bores were bigger about 1mm larger on the latest one and it is exactly like the 300, but with 32mm.
and yes, those DNA airbox is damn expensive. |
|
November 25th, 2014, 06:17 PM | #92 |
modaholic junkie
Name: Nick
Location: Athens, Greece
Join Date: Sep 2012 Motorcycle(s): 2001 ZX-12R, 2009 ninja 345cc and plenty of others in the past... Posts: 438
Blog Entries: 2
|
a little update...
today I finished with certain details that needed to be done before placing the engine on the bike... firstly, this is how I shaped the inner side of the 250 side cover to fit on the 300's slipper clutch and leaving it to rotate freely... [/URL] and this is how I tapped the "kleen" system...closest possible to the exhaust port for optimum throttle response... [/URL] I made and fit a couple of headless bolts... [/URL] starter, mechanical tensioner and clutch cover in place... [[/URL] camshafts' timing 102/105 for intake and exhaust respectively measured with cam chain tensioner in place, top cover on and ready to put on bike by tomorrow hopefully... [/URL]
__________________________________________________
If noone has tried it before, I will !!! |
|
November 26th, 2014, 09:59 AM | #93 |
modaholic junkie
Name: Nick
Location: Athens, Greece
Join Date: Sep 2012 Motorcycle(s): 2001 ZX-12R, 2009 ninja 345cc and plenty of others in the past... Posts: 438
Blog Entries: 2
|
at last engine is in place...
[/URL] you can also see the pieces that will make my exhaust system... once I put it together and fit it on the bike it will all be a matter of details before I start it up for the first time...
__________________________________________________
If noone has tried it before, I will !!! |
|
November 27th, 2014, 09:48 AM | #94 |
modaholic junkie
Name: Nick
Location: Athens, Greece
Join Date: Sep 2012 Motorcycle(s): 2001 ZX-12R, 2009 ninja 345cc and plenty of others in the past... Posts: 438
Blog Entries: 2
|
at last exhaust system all welded and fitted...
I know it looks kinda weird but a couple of guys who make custom exhaust systems gave me good reviews on a theory basis, given the way I want it to perform... end can is carbon and taken off a '92 ZZR-1100 full "Laser" racing exhaust system... [/URL] [/URL] next is working on wiring and placing TBs, radiator and hoses... hope to start it up by end of next week...
__________________________________________________
If noone has tried it before, I will !!! |
|
December 3rd, 2014, 08:49 AM | #95 |
modaholic junkie
Name: Nick
Location: Athens, Greece
Join Date: Sep 2012 Motorcycle(s): 2001 ZX-12R, 2009 ninja 345cc and plenty of others in the past... Posts: 438
Blog Entries: 2
|
a little updating...
radiator and hoses in place, wiring connected, I finally managed to get it started up and idling smoothly !! I am very happy and anxious to ride it at last...first thing I noticed is sound is more deeptone than before... still have to find a way to fit properly some sensors since housing or location on 300 engine is different to 250's so I still have a little modding to do, especially with the speed sensor and the oil pressure sensor... measured base CR to be quite high...13,55:1 it was not what I originally intended but it is ok, since squish and valve to piston clearances are ample... next update will be a video of it idling and revving a bit... (I hate breaking-in periods but I have to be gentle with it while I work on the AFR map...)
__________________________________________________
If noone has tried it before, I will !!! |
|
December 17th, 2014, 07:51 AM | #96 |
ninjette.org sage
Name: bruce
Location: northern illinois
Join Date: Jan 2012 Motorcycle(s): Race bikes:08 Ninja 250,11 R6,16 ZX6,SV650.3 HD-1947,2-2003,2010. 1946 Indian and a lot of dirt bikes.2 Posts: 999
|
Any progress Nick?
|
|
December 20th, 2014, 07:13 PM | #97 |
modaholic junkie
Name: Nick
Location: Athens, Greece
Join Date: Sep 2012 Motorcycle(s): 2001 ZX-12R, 2009 ninja 345cc and plenty of others in the past... Posts: 438
Blog Entries: 2
|
I am very sorry for not updating but I have quit finishing up the bike at the moment, even if so close, because my father passed away a few days back and I believe you all realize I am not exactly at my best...I barely even get online...
I need to take care of my mother, who is totally devastated by our loss and some other important family issues... I hope to be back with progress some time after the holidays... I wish Merry Christmas and a happy new year to each and every one of you and your families...
__________________________________________________
If noone has tried it before, I will !!! |
|
December 21st, 2014, 06:08 AM | #98 |
ninjette.org sage
Name: bruce
Location: northern illinois
Join Date: Jan 2012 Motorcycle(s): Race bikes:08 Ninja 250,11 R6,16 ZX6,SV650.3 HD-1947,2-2003,2010. 1946 Indian and a lot of dirt bikes.2 Posts: 999
|
I'm sorry for your loss Nick. God bless you and your family.
|
|
December 21st, 2014, 07:13 AM | #99 |
ninjette.org certified postwhore
Name: .
Location: .
Join Date: Feb 2011 Motorcycle(s): . Posts: Too much.
MOTM - Feb '13, Feb '14
|
I'll be keeping you in my thoughts, Nick. I'm sorry to hear that.
|
|
December 24th, 2014, 04:27 PM | #100 |
ninjette.org member
Name: Jake
Location: Manila
Join Date: Apr 2014 Motorcycle(s): 250R Posts: 135
|
What kind of gearing are you thinking about using?
|
|
February 5th, 2015, 11:37 AM | #101 |
modaholic junkie
Name: Nick
Location: Athens, Greece
Join Date: Sep 2012 Motorcycle(s): 2001 ZX-12R, 2009 ninja 345cc and plenty of others in the past... Posts: 438
Blog Entries: 2
|
Ok guys, I know I've been away for a while but I really needed to gather myself back together....
I've managed to get back to finishing up the bike, mostly to keep my mind busy with other things... I managed to get it started, checked for leakage of oil or liquids, connected the autotune and set a zero map on the PC V to start over the fuel setting process... I did a few miles around town, mostly to get the parts "bonded" together and get some fuel values, as well as to double check for leakage or any operation abnormalities.... It is weird...so far it seems a complete success performance-wise (can't say anything about reliability though) but I am not thrilled beecause I can't feel happy even if I had been waiting for that so long... Anyway...here are my first impressions which you will be soon able to see for yourselves... While having to break-in a bit the engine and operating it up to 8k prm (with the 300 internal gearing and a 14/41 final), the engine feels very "punchy" from 3k on but very linear too...I can't really express it in words but I will give you sth that some of you might have experience with...the engine feels exactly like a gixxer 750, only missing a couple of cylinders !! It is very quick-revving, torquey and sounds a bit beefier than 250/300 stocks I am still working on it; fairings will not be in place for a while, cables are hanging all over it, it is full of dust and dirt since it has been sitting in the garage for so many months and I won't bother cleaning it up before it is all set... important things I have noticed during those first 50 km I have been riding it... well for one it has come as a big surprise the engine is not overheating ! that oil cooling system of the 300 has nothing to do with the 250 predecessor...no need for extra radiator (at least not yet) or oil cooler... second is I definetely must use even larger injectors ! I have seen values up to "106" on the PC cells to get it to the right ratio...I set it to "85" for now and tomorrow or by next week will fit some bigger ones... I must admit that I have been operating it with filter pods for now but will test a lot to decide the final intake form... the exhaust system seems to be doing its job just fine... there is no oil steaming from the case breather even when temp goes really high... it needs no effort whatsoever to get the front wheel in the air with 1st gear without using the clutch... base CR is 12,55:1 after all...static is 230 psi when cold I really don't know how this will go on but its performance is beyond what I had been expecting I have promised you some video so I will soon upload sth from my first ride... ps: I noticed Shawn has progressed on his turbo successfully too and I hope Bruce and Eric have too...I have a lot of catching up to do... thank you for your understanding and your supporting e-mails
__________________________________________________
If noone has tried it before, I will !!! |
|
February 5th, 2015, 01:20 PM | #102 |
modaholic junkie
Name: Nick
Location: Athens, Greece
Join Date: Sep 2012 Motorcycle(s): 2001 ZX-12R, 2009 ninja 345cc and plenty of others in the past... Posts: 438
Blog Entries: 2
|
very first start-up ! fired right up but died after a while since I had it zero-mapped and it was just too lean to keep idling...
__________________________________________________
If noone has tried it before, I will !!! |
|
February 5th, 2015, 04:04 PM | #103 |
Motorcycle bon vivant...
Name: Rassie
Location: Cary, NC
Join Date: Jun 2011 Motorcycle(s): 300 Ninja, 250R Ninja, SV650S, CB350, GT750, Aprilia RS250, Triumph Street Triple R Posts: 101
|
Very nice indeed...
__________________________________________________
NESBA 13, 300 Ninja, 250r Ninja, 06 SV650, Ninja ex250, CB350, CL90 ,GT750, Aprilia RS250, Triumph Street Triple R www.mybikeproject.com |
|
February 5th, 2015, 05:21 PM | #104 |
RIP Alex
Name: Cuong
Location: Houston, TX
Join Date: Apr 2011 Motorcycle(s): '10 250r, '09 265r Posts: A lot.
Blog Entries: 2
|
Sounds good from what I can tell on my dated laptop! Keep your head up bud!
__________________________________________________
HalfFast Racing Team Serving Greater Houston Area Riders:WFO Riders MotoHouston HPC CMRA Ride Smart Fastline Lone Star Track Days |
|
February 5th, 2015, 05:44 PM | #105 |
ninjette.org guru
Name: Poul
Location: Seattle
Join Date: Jan 2015 Motorcycle(s): 1999 Triumph Legend "Arwen", 2006 Ninja 650 "Matsuo Hotaru". 2010 Ninja 250 "Firefly" - sold. Posts: 338
|
Very impressive!
__________________________________________________
Screw the inscrutable, eff the ineffable. |
|
February 5th, 2015, 11:06 PM | #106 |
Freedom for Germany
Location: This World
Join Date: May 2011 Motorcycle(s): Ninja 250R-FI Posts: A lot.
|
Hey Nick,
nice to have you back again and I hope you and your family are doing fine. About your bike let me say, what an impressive sound of power |
|
February 6th, 2015, 09:57 AM | #107 |
modaholic junkie
Name: Nick
Location: Athens, Greece
Join Date: Sep 2012 Motorcycle(s): 2001 ZX-12R, 2009 ninja 345cc and plenty of others in the past... Posts: 438
Blog Entries: 2
|
ok guys, latest update...
switched to suzuki gsx-r 750 k7 main injectors and fuel cell values are now within a -/+30 so they are just fine for what I had in mind....need a few days to fine tune lower-mid rpm range... switched to same model's ignition coils but noticed no difference in the break-in revving range thing is my bike is getting more and more kawa-zuki ! gsxr 750 front brake reservoir, rear shock, injectors and coils...hahaha anyway it's been raining, couldn't ride long enough but I must say that the slipper clutch is a feature I've come to appreciate more and more... initially I thought it would be useless for an experienced rider or that it is more of a marketing thing but truth is it works nicely and makes a difference even in everyday use, especially when roads are slippery....
__________________________________________________
If noone has tried it before, I will !!! |
|
February 8th, 2015, 05:01 PM | #108 |
modaholic junkie
Name: Nick
Location: Athens, Greece
Join Date: Sep 2012 Motorcycle(s): 2001 ZX-12R, 2009 ninja 345cc and plenty of others in the past... Posts: 438
Blog Entries: 2
|
ok guys, this is a first "teaser" video...
starting up cold right from home for a little ride around the neighborhood in traffic along with my wife (more than 300lbs of total weight on the bike) of course still breaking-in the engine (revving it up to 8k or so), final gearing is one tooth longer (14/41) and throttle opens up to 40% max for now... Fuel values are not fine tuned yet but autotune is enabled and calibrating values for my given AFR... not much to see here but soon will upload one on my own on a highway (shows 90mph on the tacho near 9k on speedo) it is a great feeling to use less than half throttle on such a small displacement engine and get up to 60mph in a glimpse...till then enjoy...
Link to original page on YouTube.
__________________________________________________
If noone has tried it before, I will !!! |
|
February 16th, 2015, 09:24 AM | #109 |
modaholic junkie
Name: Nick
Location: Athens, Greece
Join Date: Sep 2012 Motorcycle(s): 2001 ZX-12R, 2009 ninja 345cc and plenty of others in the past... Posts: 438
Blog Entries: 2
|
thank you all for your supporting comments !
engine has now about 250miles and some extra idling/revving hours... after a week or so I will change oil to check if there are any metal residues or anything suspicious, check valve clearance, spark plug color etc and IF everything ok, then dyno is next... so far AFR is set for 0-60% throttle and up to 8500rpm or so... engine sounds more familiar, less noisy and vibrating than the video but feels waaaayyyy different ! I get more and more astonished by the performance of that thing... can't wait to twist that throttle...
__________________________________________________
If noone has tried it before, I will !!! |
|
February 16th, 2015, 09:47 AM | #110 |
I'm crazy,your excuse is?
Name: Winston
Location: Connecticut
Join Date: May 2013 Motorcycle(s): 250 2007 ninja Posts: A lot.
|
excellent! Feels great to have your own creation running right? |
|
February 16th, 2015, 08:19 PM | #111 |
modaholic junkie
Name: Nick
Location: Athens, Greece
Join Date: Sep 2012 Motorcycle(s): 2001 ZX-12R, 2009 ninja 345cc and plenty of others in the past... Posts: 438
Blog Entries: 2
|
can't describe it in words...It kinda feels like
__________________________________________________
If noone has tried it before, I will !!! |
|
February 17th, 2015, 07:20 AM | #112 |
1/4 English, 3/4 Kick Ass
Name: Jeremy
Location: Dayton, OH
Join Date: Sep 2011 Motorcycle(s): 2002 Triumph Speed Triple 955i, '05 Suzuki SV650S(retired), '11 Ninja 250R(sold) Posts: A lot.
|
Read through this whole project...dear god that's a lot of work!
Looking and sounding great so far, but can't wait to get some fly-by shots to really hear what it sounds like. |
|
February 17th, 2015, 09:34 AM | #113 | |
modaholic junkie
Name: Nick
Location: Athens, Greece
Join Date: Sep 2012 Motorcycle(s): 2001 ZX-12R, 2009 ninja 345cc and plenty of others in the past... Posts: 438
Blog Entries: 2
|
Quote:
well Jeremy, to be totally honest it was more than a lot of work !! if I had started over tuning my ZX-12R, it would have been much less working hours, mostly because the R&D is there from many tuners like APE, Muzzy etc... this thing, hell no !! previous engine blew up because of a faulty shift drum scattered inside on May... thinking about what next (250 again, 250+ kit, 300 stock or all the way) took me another month of studying and talking with people all over the world to find which parts of the 250 I could use and would help performance and concluding to the disappointment of being on my own... none had gone that far "marrying" a 300 to an all-aluminum overbore kit designed for the 250 exclusively, which was a gambling thing by itself, not only because there was no previous data, but in addition it is not being manufactured by some known company such as Beet, JE etc but by some Asian non-warranty enthusiasts who happen to make them because it is a popular upgrade in Malaysia etc... and there's more !! they were unwilling to provide any guidelines or guarantee that parts such as gaskets for example would be available...so I was in "darkness" (that's how the <Batman> came into the title...) and had to do my own measurements, improvements, lightening etc... then more disappointment to find out piston's faulty valve relief angles and unnecessary overweight... not easy for some enthusiast without tools, a low budget and mechanics having no previous experience as well of that kind of madness on that certain engine, that almost any tuner looks down to as unworthy tuning to such extent and a waste of time and money (even if successful, brings no fame aka money to the store...) by the time I got the money and managed to calm my wife down July was bringing the need for some vacation... then finding the engine in a good state and not paying a fortune for it was another PITA... I found one I happened to know was the one I was looking for, got it in August and took me countless working hours, sleepless nights and a house full of borrowed tools, metal debris, oil stains, sweat and tears... took me another 6 months to get here (had some family loss that kept me away from everything for a while...) I still can't say it was worth it since I can say nothing about the realiability... as far as performance, given the fact that it is only a 345cc, I can compare it to a ninja 650 (!!!) so it is definetely a "Hulk", giving me a huge smile evey time I ride it even if holding myself to stick under 8k rpm... IF it does last say....10k miles or so of my brutal riding it will be beyond any kind of success I would have imagined but until then there is a long way to go...otherwise I will make it possible to find a way to place either a tuned ninja 650 engine... like I've said before, madness is the only inhabitant of my brain...
__________________________________________________
If noone has tried it before, I will !!! |
|
|
February 20th, 2015, 06:08 PM | #114 |
modaholic junkie
Name: Nick
Location: Athens, Greece
Join Date: Sep 2012 Motorcycle(s): 2001 ZX-12R, 2009 ninja 345cc and plenty of others in the past... Posts: 438
Blog Entries: 2
|
small update...
400miles of breaking-in, another 150 to go till I check valve clearance and start up connecting quickshifter, gear indicator and placing fairings... then another 50 of full throttle and I'm dynoing it ! Hopefully within the first week of March... compared tacho and gps readings to find out that tacho is still 5% "optimistic"... fuel consumption has gone close to 5,5l/100km...hope it is because engine is still "tight"...
__________________________________________________
If noone has tried it before, I will !!! |
|
March 10th, 2015, 01:11 AM | #115 |
Freedom for Germany
Location: This World
Join Date: May 2011 Motorcycle(s): Ninja 250R-FI Posts: A lot.
|
Nick since I know you'll always be looking for the most possible high revs let me give you some little information, but please keep in mind that I don't know if the measurements are exactly the same to fit your engine.
The Kwaki EL250B from the technical infos should be the same like our 2-fiddy, with one difference, it is an air-cooled, but bore and stroke look the same and the engine should rev higher, so this engine is using double-valve-springs (you could search in the bay for "kawasaki el 250 zylinderkopf"). Good luck for your next steps |
|
March 10th, 2015, 03:06 AM | #117 | |
modaholic junkie
Name: Nick
Location: Athens, Greece
Join Date: Sep 2012 Motorcycle(s): 2001 ZX-12R, 2009 ninja 345cc and plenty of others in the past... Posts: 438
Blog Entries: 2
|
Quote:
I have come to a halt in my progress at the moment since it is a priority to repair my friend's engine I managed to damage so when I am through with that I will share all of my progress... breaking-in is almost over but not using the bike at the moment since the weather here is not at its best...
__________________________________________________
If noone has tried it before, I will !!! |
|
|
March 15th, 2015, 06:00 AM | #118 |
ninjette.org member
Name: red
Location: KL, Malaysia
Join Date: Apr 2013 Motorcycle(s): Ninja 250R, GSXR600 K4, KX250F,NSR150SP, Yamaha TZM150 Posts: 68
|
Amazing news as always Nick, i'm really glad this turns out good! Can't wait to look at the dyno graph!
|
|
May 26th, 2015, 07:42 AM | #119 |
modaholic junkie
Name: Nick
Location: Athens, Greece
Join Date: Sep 2012 Motorcycle(s): 2001 ZX-12R, 2009 ninja 345cc and plenty of others in the past... Posts: 438
Blog Entries: 2
|
so, after too many holdbacks and unpredictable events in my life, this is not a dead project.... I haven't been able to ride my bike for a long time because of a number of things going on which are of no need to mention here...
anyway... time to move on... all this time I have been pretty busy... on one hand I had to use sth else as my everyday means of in-town transportation... so I got cheap an old, dumped yamaha tw200 and got down to work... I switched the whole front system with a 2-stroke yamaha tdr250's which had been sitting in a backyard for ages, changed oil and seals, took the rear brake system too, switched to 2,5" and 3,5" inch spoke wheels for front and rear, new steel lines, a donator Z-750 for front master cylinder and rear shock and some 125 2-stroke racing slick tyres and I have my tinymotard thing ready.... pics some time later on... now to the chase... after about 1k miles of riding I started noticing some strange clinging noise from the valves and a mild drop of performance... so i decided to take it apart and have it inspected... the results were sth totally unexpected... I will give you thorough info about it, for now the engine is resting at my mechanic's store and ready to be put back together... Shawn's turbo project write-up have been inspiring and helpful, I am most probably going to use the '13-'15 zx6r's exhaust valve springs too... what i can tell you for now and show you with pics is to definetely STAY AWAY from the kuwahara big block kit whether it is for a 250 or a 300 engine.... special thanks to @cuong-nutz both for helping me out by sending me an excellent condition used 300 head, @garth285 for all the precious info concerning springs, studs etc and @Somchai for support and guiding through rough times. I really appreciate it guys !! will give food for debate soon...
__________________________________________________
If noone has tried it before, I will !!! |
|
May 26th, 2015, 09:10 AM | #120 |
ninjette.org sage
Name: bruce
Location: northern illinois
Join Date: Jan 2012 Motorcycle(s): Race bikes:08 Ninja 250,11 R6,16 ZX6,SV650.3 HD-1947,2-2003,2010. 1946 Indian and a lot of dirt bikes.2 Posts: 999
|
Glad you didn't disappear with this project.
I'm eager to see what went wrong with your big bore kit. I acquired one to do some work with and after machining and modifying the piston decided to avoid the obvious impending failure and not assemble it. Now I'm researching piston availability from another source to see if I can make this happen. |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Holy Demo Day, Batman! | Goom | Ride Reports | 9 | March 18th, 2013 03:50 PM |
Holy freakin' tach batman! | smokinsingle | Ninjettes At Speed | 6 | March 23rd, 2012 07:00 PM |
Pazzo shorty's hulk style | zartan | 2008 - 2012 Ninja 250R Farkles | 8 | April 15th, 2010 08:03 AM |
[topix.net] - Hulk Hogan learns not to stand between a woman and her motorcycle | Ninjette Newsbot | Motorcycling News | 0 | August 27th, 2009 06:30 AM |
|
|