March 20th, 2015, 10:08 AM | #6481 |
Certified Troublemaker
Name: Teri
Location: Hamilton, NJ
Join Date: Oct 2012 Motorcycle(s): 2006 Ninja 250r "Pikachu", 2017 Ninja 650 "Epona" Posts: A lot.
MOTM - Aug '13, Aug '14, Feb '17
|
The tire i put on? If so nothing. As far as i know the swingarms are the same on the newgens, someone else may be able to confirm that though.
__________________________________________________
Raven's Rejuvenation A bruise is a lesson... and each lesson makes us better... |
|
March 20th, 2015, 10:23 AM | #6482 | |
ninjette.org member
Name: Steven
Location: MA
Join Date: May 2013 Motorcycle(s): 10 Ninja 250 Posts: 172
|
Quote:
|
|
|
March 20th, 2015, 01:21 PM | #6483 |
ninjette.org member
Name: Brandon
Location: Cleveland, OH
Join Date: May 2014 Motorcycle(s): 99 Ninja 250 Posts: 217
|
First time ordering a chain and i went to a 15t in front and ordered a 106 length chain instead of a longer one. I did not know.
__________________________________________________
Everything you’ve ever wanted is on the other side of fear. –George Addair |
|
March 20th, 2015, 01:31 PM | #6484 |
in your machine
Name: Scott
Location: Summer Shade, Ky.
Join Date: Oct 2014 Motorcycle(s): 98 Ninja 250/F12 aka ZX-2R "SERENITY", 91 Ninja 500/A5 aka ZX-5R "Phoenix", 84 Honda GL1200A "SIREN" Posts: A lot.
Blog Entries: 25
MOTM - Jun '17, May '16, Mar '15
|
Standard length chain works on a 15t front
__________________________________________________
violente et ignorantia ZX-2R BLOG Twitter and Instagram = Ghostt_Scott I'm not here to change your mind, just to inform. |
|
March 20th, 2015, 01:41 PM | #6485 |
ninjette.org member
Name: Brandon
Location: Cleveland, OH
Join Date: May 2014 Motorcycle(s): 99 Ninja 250 Posts: 217
|
It does not, it was on link short even with the master link. Ubless it was because i did not move the wheel up to meet the chain. Well a new longer chain has been ordered so we will see what happens.
__________________________________________________
Everything you’ve ever wanted is on the other side of fear. –George Addair |
|
March 20th, 2015, 05:04 PM | #6486 |
RIP Alex
Name: Cuong
Location: Houston, TX
Join Date: Apr 2011 Motorcycle(s): '10 250r, '09 265r Posts: A lot.
Blog Entries: 2
|
__________________________________________________
HalfFast Racing Team Serving Greater Houston Area Riders:WFO Riders MotoHouston HPC CMRA Ride Smart Fastline Lone Star Track Days |
|
March 20th, 2015, 05:10 PM | #6487 |
in your machine
Name: Scott
Location: Summer Shade, Ky.
Join Date: Oct 2014 Motorcycle(s): 98 Ninja 250/F12 aka ZX-2R "SERENITY", 91 Ninja 500/A5 aka ZX-5R "Phoenix", 84 Honda GL1200A "SIREN" Posts: A lot.
Blog Entries: 25
MOTM - Jun '17, May '16, Mar '15
|
Mine did just fine, and yes moving the wheel forward does work, and is perfectly safe, that why it's adjustable.
__________________________________________________
violente et ignorantia ZX-2R BLOG Twitter and Instagram = Ghostt_Scott I'm not here to change your mind, just to inform. |
|
March 21st, 2015, 07:26 AM | #6488 |
ninjette.org guru
Name: Artie
Location: Canada
Join Date: Mar 2013 Motorcycle(s): Stuff Posts: 284
|
160 is finally on. Now that the airbox has also been removed, it's time to relocate the brake reservoir, today.
__________________________________________________
Paint side up, rubber side down! |
|
March 21st, 2015, 01:21 PM | #6489 |
The Corner Whisperer
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
|
^^^ Cool! Wish my work today was as cool.
More to come by the end of the day.
__________________________________________________
Goal: Shake A Million Hands | Look through the corners | Track Day Prep | Closest track? | The Mid-Ohio School |
1 out of 1 members found this post helpful. |
March 21st, 2015, 03:38 PM | #6490 |
The Corner Whisperer
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
|
Generator - check (ready to power stuff/trailer)
#511 250 - check (ready to race/track day/coach) #126 - 08 r6 - check (awwww yea... speed) Trailer Upgrades - WIP (lights, shelves/storage and better sleeping arrangements) Working on wiring now...
__________________________________________________
Goal: Shake A Million Hands | Look through the corners | Track Day Prep | Closest track? | The Mid-Ohio School |
|
March 21st, 2015, 05:53 PM | #6491 |
ninjette.org sage
Name: James
Location: Lakeland
Join Date: Aug 2014 Motorcycle(s): 2007 Ninjette Posts: 809
|
You have any pictures of your trailer set up? Your "sleeping arrangements" point interests me
__________________________________________________
"That's what" -she |
|
March 21st, 2015, 08:18 PM | #6492 |
The Corner Whisperer
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
|
The pics of the shelving will kinda just have to wait, I just started. As far as sleeping arrangements go, I was putting a queen sized air mattress down on the floor, with a small space heater for the cooler weather. This year I have upgraded to cots (me and Kevin) with pads and the same space heater.
I will get ya some pics as soon as I am further along. I should have it all done in the next couple of weekends.
__________________________________________________
Goal: Shake A Million Hands | Look through the corners | Track Day Prep | Closest track? | The Mid-Ohio School |
|
March 21st, 2015, 09:34 PM | #6493 |
Jersey Devil
Name: Daks
Location: Austin, TX
Join Date: Oct 2012 Motorcycle(s): '06 Ninja 250 Posts: 469
|
Rode him to work last two days after the valve adjust. Seems to be fine.
Still smells a bit like gas. I think the carbs need work. But hey, now that the horn wire is no longer broken, the horn works again
__________________________________________________
~Riding like a grandma because I wanna ride as a grandma~ |
|
March 21st, 2015, 09:56 PM | #6494 | |
in your machine
Name: Scott
Location: Summer Shade, Ky.
Join Date: Oct 2014 Motorcycle(s): 98 Ninja 250/F12 aka ZX-2R "SERENITY", 91 Ninja 500/A5 aka ZX-5R "Phoenix", 84 Honda GL1200A "SIREN" Posts: A lot.
Blog Entries: 25
MOTM - Jun '17, May '16, Mar '15
|
Quote:
__________________________________________________
violente et ignorantia ZX-2R BLOG Twitter and Instagram = Ghostt_Scott I'm not here to change your mind, just to inform. |
|
|
March 22nd, 2015, 12:52 AM | #6495 |
ninjette.org certified postwhore
Name: TC
Location: Hawaii
Join Date: Sep 2013 Motorcycle(s): A lot. Posts: A lot.
|
Plan B.
__________________________________________________
Just batshit crazy. All his posts are endless diatribes. Some are actually entertaining but mostly batshit crazy. |
|
March 22nd, 2015, 12:15 PM | #6496 | |
ninjette.org member
Name: Charley
Location: Northern California
Join Date: Jun 2013 Motorcycle(s): 2013 Kawasaki EX300 , 1999 Kawasaki ZRX1200. Posts: 164
|
Quote:
__________________________________________________
IBA # 59523 |
|
|
March 22nd, 2015, 05:04 PM | #6497 | |
Certified Troublemaker
Name: Teri
Location: Hamilton, NJ
Join Date: Oct 2012 Motorcycle(s): 2006 Ninja 250r "Pikachu", 2017 Ninja 650 "Epona" Posts: A lot.
MOTM - Aug '13, Aug '14, Feb '17
|
Quote:
Red loctite sucks.
__________________________________________________
Raven's Rejuvenation A bruise is a lesson... and each lesson makes us better... |
|
|
March 22nd, 2015, 05:07 PM | #6498 |
ninjette.org sage
Name: michael
Location: Central Georgia
Join Date: May 2013 Motorcycle(s): 2019 Ninja 400, Sold 2012 Ninja 650, Sold 2009 Ninja 250r, Sold 2007 DRZ400s Posts: 628
|
Re assembled the carbs with the jet kit. Mounts up the area p. Love it! Put on the pod filter, pulled the cams and time shims out. Just waiting to get new shims and a set of tires. Haven't ridden this bike in 9 months.
|
|
March 22nd, 2015, 08:41 PM | #6499 |
#squid
Name: nickypoo
Location: Five Guys
Join Date: Jul 2011 Motorcycle(s): Track dedicated 2008 ZX6R Posts: A lot.
MOTM - Jul '16
|
I think I finally have a grasp on valve adjustments.
__________________________________________________
|
|
March 24th, 2015, 01:22 AM | #6500 |
ninjette.org member
Name: dwen
Location: CA
Join Date: Mar 2015 Motorcycle(s): ducati Posts: 10
|
Gave her a bath in the afternoon and then went for a ride... Started raining on the way back, so now she's filth all over again... Just how I like her
__________________________________________________
Prayer is dignity of soul |
|
March 24th, 2015, 09:32 AM | #6501 |
Fast-Guy wannabe
Name: Jason
Location: Brentwood, Ca
Join Date: Oct 2011 Motorcycle(s): 2009 Ninja250, 2011 RM-Z250, 2004 NSR50, Posts: A lot.
MOTM - Jan '13
|
After 65,000 miles I'm finally replacing the original pads, goes to show how much I actually use the things. Brand new DID 520 VX2 chain with two new sprockets, still the same 15-41 ratio. The chain and sprockets lasted 26,500 miles before the tight and loose spots could be felt under acceleration.
|
|
March 24th, 2015, 09:33 AM | #6502 |
The Corner Whisperer
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
|
Front or rear rojo? 65k... those got to be rears.
__________________________________________________
Goal: Shake A Million Hands | Look through the corners | Track Day Prep | Closest track? | The Mid-Ohio School |
|
March 24th, 2015, 09:35 AM | #6503 |
The Corner Whisperer
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
|
I will be starting the drilling for safety wire on all bolts on my 08 r6, if.... my bits come in. hahahahaha Planning on breaking about 5 or 6 to get the job done.
__________________________________________________
Goal: Shake A Million Hands | Look through the corners | Track Day Prep | Closest track? | The Mid-Ohio School |
|
March 24th, 2015, 10:02 AM | #6504 |
I'm crazy,your excuse is?
Name: Winston
Location: Connecticut
Join Date: May 2013 Motorcycle(s): 250 2007 ninja Posts: A lot.
|
Jumped on her to check ergos. made few vroom vroom sounds and cramped up. Need to go to gym...
|
|
March 24th, 2015, 12:39 PM | #6505 |
Fast-Guy wannabe
Name: Jason
Location: Brentwood, Ca
Join Date: Oct 2011 Motorcycle(s): 2009 Ninja250, 2011 RM-Z250, 2004 NSR50, Posts: A lot.
MOTM - Jan '13
|
|
1 out of 1 members found this post helpful. |
March 24th, 2015, 07:38 PM | #6506 |
ninjette.org sage
Name: bob
Location: Earf
Join Date: Apr 2013 Motorcycle(s): 2005 Ninja 250, 2006 SV650N Posts: 642
|
Well in the past few days I've gone to stainless steel brake lines, adjusted the fuel screws again, and found a nut missing from one my engine mount bolts.
|
|
March 24th, 2015, 07:39 PM | #6507 |
#squid
Name: nickypoo
Location: Five Guys
Join Date: Jul 2011 Motorcycle(s): Track dedicated 2008 ZX6R Posts: A lot.
MOTM - Jul '16
|
The shenanigans continue.
__________________________________________________
|
|
March 24th, 2015, 07:59 PM | #6508 |
ninjette.org member
Name: Shawn
Location: Texas City Texas
Join Date: Mar 2015 Motorcycle(s): Ninja 250r Posts: 24
|
Did the 15T front sprocket upgrade today..huge difference.
Taking her on the highway in the morning..must..sleep...now... Nope still not morning..damn!!!
__________________________________________________
Just because your bikes faster doesnt mean you wont get drug around a turn.. |
|
March 25th, 2015, 06:42 PM | #6509 |
ninjette.org certified postwhore
Name: .
Location: .
Join Date: Feb 2011 Motorcycle(s): . Posts: Too much.
MOTM - Feb '13, Feb '14
|
Ordered some stuff today. Didn't really get any work done on the bike unfortunately.
SKF wheel bearings. Gotta pull them for powder coat, may as well get decent bearings to replace with. 14mm MC from a ninja 650. New name plate for my repacked Muzzy Pitbull weld-on spool adapters Pitbull 8mm delrin spools Will get some T-Rex stands soon. Spool rear, triple lift front. Swingarm is going to get blasted, bearings serviced, spool adapters welded on, and then painted with bedliner. Rims are going to be stripped down then powder coated bronze. I'm stoked. I still need a new clutch lever, going to buy a spare of both for safety. I also need a couple spare Woodcraft bars. Then it's all going to be putting the whole thing back together. |
|
March 25th, 2015, 06:47 PM | #6510 |
in your machine
Name: Scott
Location: Summer Shade, Ky.
Join Date: Oct 2014 Motorcycle(s): 98 Ninja 250/F12 aka ZX-2R "SERENITY", 91 Ninja 500/A5 aka ZX-5R "Phoenix", 84 Honda GL1200A "SIREN" Posts: A lot.
Blog Entries: 25
MOTM - Jun '17, May '16, Mar '15
|
looking forward to the ride report.
__________________________________________________
violente et ignorantia ZX-2R BLOG Twitter and Instagram = Ghostt_Scott I'm not here to change your mind, just to inform. |
|
March 25th, 2015, 06:52 PM | #6511 |
in your machine
Name: Scott
Location: Summer Shade, Ky.
Join Date: Oct 2014 Motorcycle(s): 98 Ninja 250/F12 aka ZX-2R "SERENITY", 91 Ninja 500/A5 aka ZX-5R "Phoenix", 84 Honda GL1200A "SIREN" Posts: A lot.
Blog Entries: 25
MOTM - Jun '17, May '16, Mar '15
|
Installed the digital gear indicator, now just have to make the fine adjustment, now the fun begins.
__________________________________________________
violente et ignorantia ZX-2R BLOG Twitter and Instagram = Ghostt_Scott I'm not here to change your mind, just to inform. |
|
March 25th, 2015, 06:53 PM | #6512 |
ninjette.org member
Name: Shawn
Location: Texas City Texas
Join Date: Mar 2015 Motorcycle(s): Ninja 250r Posts: 24
|
Threw on my Shorty
https://m.youtube.com/watch?v=E1pJjqPk8_Q
__________________________________________________
Just because your bikes faster doesnt mean you wont get drug around a turn.. |
|
March 25th, 2015, 06:57 PM | #6513 | |
in your machine
Name: Scott
Location: Summer Shade, Ky.
Join Date: Oct 2014 Motorcycle(s): 98 Ninja 250/F12 aka ZX-2R "SERENITY", 91 Ninja 500/A5 aka ZX-5R "Phoenix", 84 Honda GL1200A "SIREN" Posts: A lot.
Blog Entries: 25
MOTM - Jun '17, May '16, Mar '15
|
Quote:
__________________________________________________
violente et ignorantia ZX-2R BLOG Twitter and Instagram = Ghostt_Scott I'm not here to change your mind, just to inform. |
|
|
March 25th, 2015, 07:21 PM | #6514 |
ninjette.org certified postwhore
Name: .
Location: .
Join Date: Feb 2011 Motorcycle(s): . Posts: Too much.
MOTM - Feb '13, Feb '14
|
Bleh. Doesn't even sound good. It's raspy at idle even. Sounds like amplified popping fart. I'll still with an 18" long can full of glass pack. That's where the best sound is at.
|
|
March 25th, 2015, 07:59 PM | #6515 |
ninjette.org member
Name: Shawn
Location: Texas City Texas
Join Date: Mar 2015 Motorcycle(s): Ninja 250r Posts: 24
|
I still have my Two brothers Carbon
Just testing the water to see what I like n the sound on vid is nothing like in person..and to be honest I could totally give 2 ****s how you think it sounds hotrod...Its not on there for your approval...smh
__________________________________________________
Just because your bikes faster doesnt mean you wont get drug around a turn.. |
|
March 25th, 2015, 08:01 PM | #6516 |
ninjette.org member
Name: Shawn
Location: Texas City Texas
Join Date: Mar 2015 Motorcycle(s): Ninja 250r Posts: 24
|
Getting into your feelings in...3....2...
__________________________________________________
Just because your bikes faster doesnt mean you wont get drug around a turn.. |
|
March 25th, 2015, 08:04 PM | #6517 |
in your machine
Name: Scott
Location: Summer Shade, Ky.
Join Date: Oct 2014 Motorcycle(s): 98 Ninja 250/F12 aka ZX-2R "SERENITY", 91 Ninja 500/A5 aka ZX-5R "Phoenix", 84 Honda GL1200A "SIREN" Posts: A lot.
Blog Entries: 25
MOTM - Jun '17, May '16, Mar '15
|
Listen to Dom, and everyone just chill out, he was just stating his opinion, respect is a two-way street.
Besides check out my new slip-ons
__________________________________________________
violente et ignorantia ZX-2R BLOG Twitter and Instagram = Ghostt_Scott I'm not here to change your mind, just to inform. |
1 out of 1 members found this post helpful. |
March 26th, 2015, 02:37 AM | #6518 |
Certified Troublemaker
Name: Teri
Location: Hamilton, NJ
Join Date: Oct 2012 Motorcycle(s): 2006 Ninja 250r "Pikachu", 2017 Ninja 650 "Epona" Posts: A lot.
MOTM - Aug '13, Aug '14, Feb '17
|
Have the rest of the rotor bolts and will have the front wheel on tonight.
__________________________________________________
Raven's Rejuvenation A bruise is a lesson... and each lesson makes us better... |
|
March 26th, 2015, 04:47 AM | #6519 |
ninjette.org sage
Name: michael
Location: Central Georgia
Join Date: May 2013 Motorcycle(s): 2019 Ninja 400, Sold 2012 Ninja 650, Sold 2009 Ninja 250r, Sold 2007 DRZ400s Posts: 628
|
|
|
March 26th, 2015, 06:14 AM | #6520 | |
I'm crazy,your excuse is?
Name: Winston
Location: Connecticut
Join Date: May 2013 Motorcycle(s): 250 2007 ninja Posts: A lot.
|
Quote:
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Discovered something scary about my Ninjette today... | kjohng | General Motorcycling Discussion | 28 | October 15th, 2021 01:40 PM |
Sold the 2006 Ninjette today :( | Renner | General Motorcycling Discussion | 31 | October 16th, 2014 11:46 PM |
Today I Gave My Ninjette Wings! | BlueHairSar | Pictures | 5 | June 20th, 2013 07:38 AM |
my bro went down today on his ninjette | richierich781 | !%@*#$%!)@#&!%@ I crashed! | 46 | January 18th, 2013 11:59 AM |
Ninjette. org hacked today | CC Cowboy | Off-Topic | 9 | April 3rd, 2011 08:55 AM |
|
|