May 15th, 2014, 04:49 PM | #1 |
ninjette.org newbie
Name: matthew
Location: south charleston
Join Date: May 2014 Motorcycle(s): franken bike/atv Posts: 8
|
new member, 95 ninja 250 drivetrain on Eton-Viper 90 Frame
I bought a wrecked 1995 ninja 250 to so i could swap the drivetrain onto an ATV chassis, so far ive got it all mounted on, and it will start up and run, however when i purchased the bike the header was removed from the bike, i had to buy the collars that hold the header to the head, and i have the half moon things that go into the collars, however there has to be something that im missing that goes between the colors and the flange itself he collars will hit the mounting bosses and theres nothing that i have that holds the stock Header tightly to the head itself. i guess i need to take a picture of what im talking about, but im assuming theres something that goes in that section, At this point i have about $300 in the entire setup Bike and ATV together and i have some extra plastics and taillights and what not that ill sell once im finished, But for now i just want to get the exhaust hooked up properly and i know im missing something on how it mounts to the head.
any help would be appreciated, and hopefully ill post some pictures of the finished ninja 250 ATV once its finished. matthew |
|
May 15th, 2014, 05:04 PM | #2 |
The Corner Whisperer
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
|
Welcome Matthew!
In for the pics...
__________________________________________________
Goal: Shake A Million Hands | Look through the corners | Track Day Prep | Closest track? | The Mid-Ohio School |
|
May 15th, 2014, 06:57 PM | #3 |
ninjette.org certified postwhore
Name: Ken
Location: Indio, CA
Join Date: Dec 2008 Motorcycle(s): '08 Kawasaki EX250 "Yoshi", '99 Kawasaki Concours "Grace", '06 Concours "Belle", '06 Yamaha YZF600R "Slick" Posts: A lot.
Blog Entries: 3
|
__________________________________________________
< ATGATT > Sweat you can wipe off, Road rash you can't. HEY!! Unregistered!! Does your bike have a name? |
|
May 16th, 2014, 07:56 AM | #5 |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
|
|
May 16th, 2014, 08:13 AM | #6 |
ninjette.org member
Name: Garrett
Location: Illinois - Midwest USA
Join Date: Jul 2013 Motorcycle(s): ZX-3R (ok, ex300) Posts: 160
|
lol.. these motorcycle/quad hybrids keep popping up here locally too.. frankenstien projects always look like fun..
|
|
May 16th, 2014, 09:36 AM | #7 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
Why are you posting these pics without making it clear that they aren't the OP's bike?
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
May 16th, 2014, 09:47 AM | #8 |
Track Clown
Name: Chris
Location: Kingman, AZ
Join Date: May 2012 Motorcycle(s): '08 250R, 21 MV F3 800, Kawasaki 400 build Posts: A lot.
MOTM - Sep '15
|
Hi.
|
|
May 16th, 2014, 09:49 AM | #9 | |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
Quote:
By insinuating that I do and that this is it, I can show something ridiculous as if it were his and the joke should be obvious. Daat's de joke. /McBane |
|
|
May 16th, 2014, 09:55 AM | #10 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
May 16th, 2014, 05:18 PM | #11 |
ninjette.org newbie
Name: matthew
Location: south charleston
Join Date: May 2014 Motorcycle(s): franken bike/atv Posts: 8
|
got to take it for a ride today for the first time, it runs much better when its under load, BUT im getting fuel overflowing from the carb, so i need to adjust the float bowl levels, it still smells rich, so im thinking that its just dumping in too much fuel, i may need to get a full rebuild kit for the carbs, im not sure, also the angle is about 4-5 degree's off of stock on the engine so the carbs are sitting alittle forward that can probably be causing the fuel leaking from the overflow tube. iom going to have to get new brake pads for the front brakes, they are sticking and i know its because they are too worn down. and im going to HAVE to get a gas cap, right now it has a plastic bag stuffed into the hole and stuffed down the edges of the cap cover area, it isnt leaking, but it isnt safe enough for me, but it was fine for a test drive, also, Mufflers are a MUST!!!!! matthew |
1 out of 1 members found this post helpful. |
May 16th, 2014, 05:22 PM | #12 |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
Nice! Replica fuel lids are on eBay for under $20 but I think you probably want a twist-off.
|
|
May 16th, 2014, 05:24 PM | #13 |
ninjette.org certified postwhore
Name: S
Location: CA/MA, usually
Join Date: Nov 2012 Motorcycle(s): 2012 Ninja 250R, 2007 Ninja 650R, 2001 F650 Dakar Posts: A lot.
|
Welcome! Looks like a crazy fun project.
|
|
May 16th, 2014, 11:47 PM | #14 |
ninjette.org certified postwhore
Name: Rick
Location: Alexandria, Louisiana
Join Date: Jan 2009 Motorcycle(s): 05 Blue Ninja 250 Posts: Too much.
MOTY - 2017, MOTM - Jan '19, Oct '16, May '14
|
Hello and welcome.
|
|
May 17th, 2014, 07:52 AM | #15 |
ninjette.org member
Name: Victoria
Location: Dallas
Join Date: Nov 2013 Motorcycle(s): 2012 Kawasaki Ninja 250 Posts: 50
|
Wild... welcome (:
|
|
May 18th, 2014, 06:36 PM | #16 |
ninjette.org newbie
Name: matthew
Location: south charleston
Join Date: May 2014 Motorcycle(s): franken bike/atv Posts: 8
|
im going to try to make the video public, but if you look up matthew cantley on facebook you can see the ATV in action doing some donuts, 10,000 RPM is all ive got it upto so far, but seeing as with no air box that 5,000 RPM was all i could do, im happy for the improvement.
matthew |
|
May 18th, 2014, 07:46 PM | #17 |
I'm crazy,your excuse is?
Name: Winston
Location: Connecticut
Join Date: May 2013 Motorcycle(s): 250 2007 ninja Posts: A lot.
|
welcome aboard, that is pretty bad ass!
|
|
May 19th, 2014, 10:28 AM | #18 |
Ninjette Jockey
Name: Tim
Location: Stockton, Ca
Join Date: Oct 2010 Motorcycle(s): Ninja 250R, Harley Davidson Heritage Softail, 2 Honda Monkeys, Polini & GRC mini GP Posts: A lot.
Blog Entries: 3
|
Welcome! I love to see people getting creative!
__________________________________________________
For what shall it profit a man, if he shall gain the whole world, and lose his own soul?. |
|
May 19th, 2014, 11:21 AM | #19 |
wat
Name: wat
Location: tustin/long beach
Join Date: Sep 2009 Motorcycle(s): wat Posts: Too much.
Blog Entries: 5
MOTM - Oct '12, Feb '14
|
the way your rear end sprocket is bolted on looks kinda terrifying. in fact the whole thing looks a bit terrifying.
i approve.
__________________________________________________
|
|
May 19th, 2014, 11:28 AM | #20 |
Intrepid Adventurer
Name: Josh
Location: Rochester/Buffalo NY
Join Date: Jan 2012 Motorcycle(s): 2004 GSXR 750 , 71 cb350streettracker, 07 Polaris Predator 500 Posts: A lot.
|
ohhhh man .
I like your style. franken freak rat quad. You should have someone machine you a plate to make the sprocket bolt up solid. and pot filters , get some haha looks like a low and mean ride
__________________________________________________
LIFE IS NOT FOR REGRETS OR EXCUSES. Breath deep, seek peace. Embrace the Madness. Life is good, let it be |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
New 2011 Ninja 250 SE and New Member! | mowad1 | New Members | 17 | June 23rd, 2011 11:16 AM |
|
|